This is an old revision of the document!
UNDER CONSTRUCTION
Axminster Metal Cutting Bandsaw
Induction Required
This equipment requires an induction prior to use. For your own safety and to avoid damage to the equipment do not attempt to use it until you have been inducted.Crush / Laceration / Entanglement / Burn Hazard (DELETE AS APPROPRIATE)
This equipment is hazardous to the user or those around them, take care during use.PPE Required
This equipment requires the use of eye protection and may require hearing protection during use.Instructions
Basic Guidelines
Risk assessment
- To add
Usage Notes
- This is The Axminster user manual.
Induction Notes
| Location: | Workshop |
| Ownership: | Hackspace |
| Induction: | TBC |
Instructions
Safety
- To be written.
- Be aware of other people around you. Don't bump into them and be respectful of usage space around the equipment.
- Tie long hair back.
- Don't wear loose clothing that might catch on any moving part.
Use the following recommended safety equipment for protection while using this machine:
- To be written
- Safety goggles for eye protection
Bandsaw blades
- The blade specification is: Bandsaw Blade Length: 1,640 mm (64.1/2“). Width: 13mm. 14TPI.
- Here is a suitable replacement blade from Axminster for £11. Axcaliber High Carbon Bandsaw Blade 1,640mm(64.1/2") x 12.7mm 14 Tpi 340686
- The spares are located in the cabinet under the bandsaw.
- If there are no more spares. buy a replacement and request reimbursement through the normal forms. Alternatively, Comment on the forum.
Usage
Preparation
- To be written.
Cutting
- To be written.
Problems
- Stop the machine first.
- Wait until the blade has stopped moving.
- To be written.
Cleaning up
- Put all safety equipment back.
- Brush or vacuum the machine to remove metal dust. Sweep area around the band saw and bin the rubbish.
Maintenance
Changing the bandsaw blade
- Find suitable gloves to protect your hands. Even blunt blades can cause damage.
- To be written.
- Purchased in Spring 2022 with a 3 year guarantee.