Metal Cutting Bandsaw - Axminster MCB115SHD

THIS PAGE NEEDS SUBSTANTIAL UPDATING - You are welcome to contribute.

Induction Required Y/N TBC

This equipment requires an induction prior to use. For your own safety and to avoid damage to the equipment do not attempt to use it until you have been inducted.

Laceration

This equipment is hazardous to the user or those around them, take care during use.

PPE Required

This equipment requires the use of eye protection and may require hearing protection during use.

Risk assessment

To add

Usage Notes

This is The Axminster user manual.

Location:	Workshop
Ownership:	Hackspace
Induction:	TBC

To be written.
Be aware of other people around you. Don't bump into them and be respectful of usage space around the equipment.
Tie long hair back.
Don't wear loose clothing that might catch on any moving part.

Use the following recommended safety equipment for protection while using this machine:

To be written
Safety goggles for eye protection

The blade specification is: Bandsaw Blade Length: 1,640 mm (64.1/2“). Width: 13mm. 14TPI.
Here is a suitable replacement blade from Axminster for £11. Axcaliber High Carbon Bandsaw Blade 1,640mm(64.1/2") x 12.7mm 14 Tpi 340686
The spares are located in the cabinet under the bandsaw.
If there are no more spares. buy a replacement and request reimbursement through the normal forms. Alternatively, Comment on the forum.

Preparation

To be written.

Cutting

To be written.

Problems

Stop the machine first.
Wait until the blade has stopped moving.

To be written.

Cleaning up

Put all safety equipment back.
Brush or vacuum the machine to remove metal dust. Sweep area around the band saw and bin the rubbish.

Maintenance

Changing the bandsaw blade

Find suitable gloves to protect your hands. Even blunt blades can cause damage.
Changing the blade requires undoing 10 screws, this is a PITA, a poorly designed process, go carefully, as some parts are not durable.

To be written.

Purchased in Spring 2022 with a 3 year guarantee.