Portable Dust Extractor - Trend T33A

WORK IN PROGRESS, please help populate

Product page: T33A - 1200W Wet & Dry M-Class Dust Extractor 240V

The T33A is a trade-rated wet & dry M-Class dust extractor with power take-off for workshop, site and trade use.

• M-Class Certification guarantees 99.9% filtration efficiency for fine dust applications and use with all wood types.
• Auto-Start 1500W Power Tool Take-Off automatically turns the extractor on and off with the connected power tool.
• Wet & Dry Extraction for use in a variety of applications.
• HEPA Cartridge Filter captures harmful fine dust particles greater than 0.3 microns.
• Filter Cleaning Function vibrates the HEPA cartridge to clear built-up filter dust between use.
• Extraction Velocity LED Indicator monitors blockages and remaining bag capacity.
• 25L Container.
• Reinforced Micro-Filter Bag.
• 5m Extraction Hose & 5m Power Cable.
• Includes combination floor tool, crevice tool, round brush and power tool adapter.

Trend T33A User Manual.pdf

Always use extraction

This machine is for use with wood dust in the

If extraction velocity monitor is red, press and hold filter shaker button for 3 seconds. (device/extraction must be on) filter will continue shaker function for a further 5 seconds after release. If the monitor turns red only as and when you connect to a power tool, ensure that the extraction spouts of the tool and hose are not blocked. If clear, it is OK to use. Check the flow periodically by removing the extraction hose.

(Fig. 4) The collection bag must be replaced when the extraction velocity monitor goes to red and stays on red. To remove bag undo the container hose pull bag off the container deflector flange. Close the bag by flipping the tab over. Dispose of the filter in a suitable container according to the applicable laws. It is good practice however, to change the bag regularly to guarantee optimal cooling of the motor. If the vacuum cleaner is used without the paper dust bag, it is recommended that the dust container be emptied and cleaned after each use. this procedure is also recommended following the suction of any type liquid.

(Fig 3) • Unlock the container catches and remove the lid. • The collection bag has a card-reinforced opening with a tab at the top. • Ensure that the collection bag is handled with care to prevent damage and that is does not get caught or ripped by the container deflector flange or other sharp objects or projections. • Insert the collection bag into the container with the opening towards the front of the vacuum cleaner. • Pull the collection bag opening over the container deflector flange ensuring the collection bag opening passes over the ridge on the container deflector. • Ensure collection bag is pushed tight. • Fold out the rest of the disposal collection bag downwards into the container.