This is an old revision of the document!
Belt & Disc Sander - Clarke CS6-9C
Laceration / Entanglement
This equipment is hazardous to the user or those around them, take care during use.PPE Required
This equipment requires the use of eye protection / hearing protection / respiratory protection during use.Specification
- 750 Watts (1.0hp) 230V induction motor.
- 6“ x 48” belt tilts & locks at any angle from 0 to 90° with spring adjuster to regulate belt tension.
- 9“ (230mm) sanding disc
- 190mm x 317mm sanding table that is adjustable between 0 & 45°. Can be used with either sanding belt or disc.
- Complete with finger guard on belt, full disc guarding & mitre fence (part code ZHTCS6962) on sanding table.
Instructions
Basic Guidelines
- Always turn on the extraction system and open the gate to the sander before use.
- Don't use gloves or anything that could get caught in the spinning mechanism.
- Don.t sand your fingers off.
- if you're sanding something particularly dusty, respiratory protection is highly advised.