This is an old revision of the document!
Sander/Linisher - Clarke CS6-9C
Laceration / Entanglement
This equipment is hazardous to the user or those around them, take care during use.PPE Required
This equipment requires the use of eye protection / hearing protection / respiratory protection during use.
Instructions
Basic Guidelines
- dont use gloves or anything that could get caught in the spinning mechanism
- dont sand your fingers off
- if you're sanding something particularly dusty, respiratory protection is highly advised, as is the extraction.
tool specs and useful links
750 Watts (1.0hp) 230V induction motor 6“ x 48” belt tilts & locks at any angle from 0 to 90° 9“ (230mm) sanding disc Spring adjuster to regulate belt tension 190mm x 317mm sanding table that is adjustable between 0 & 45°. Can be used with either sanding belt or disc. Complete with finger guard on belt, full disc guarding & mitre fence (part code ZHTCS6962) on sanding table.
Consumables for the belt sander:
discs
Sanding Disc for CS6-9C Coarse (Pk5) - £7.19
Sanding Disc for CS6-9C Medium (Pk5) - £7.19
Sanding Disc for CS6-9C Fine (Pk5) - £7.19
belts
6"x 48" Sanding Belt for CS6-9BD Coarse (Pk5) - £15.59