Heat Press - HP3804

Burn Hazard

This equipment is hazardous to the user or those around them, take care during use.

Basic Guidelines

  • You'll need an image printed from the Sublimation Printer - Sawgrass SG400
  • Make sure the handle is lifted up.
  • Plug in with kettle lead.
  • Turn the heat press on.
  • The temperature will be dependant on which fabric you are printing on. It printed best between 180 - 200 degrees for one user. You can manually change the temperature using the up and down arrows on the left-hand screen.
  • Lay the fabric on the press, with the side you want to press on facing up.
  • Lay the print plastic/shiny side down on the fabric.
  • Pull the handle down until it locks.
  • The amount of time you press for will also depend on which fabric you are printing on. one user found it printed best for between 40 - 55 seconds.
  • Pull the handle up. Wait for the fabric to cool for a couple of minutes. Peel off the plastic/paper.
  • REMEMBER: TURN THE HEAT PRESS OFF WHEN FINISHED AND REPLACE BACK ON THE TOOLS & EQUIPMENT SHELF.

Additional Information

  • equipment/mainroom/hp3804_heat_press
  • Last modified: 3 weeks ago
  • by 127.0.0.1