Heat Press - HP3804
Burn Hazard
This equipment is hazardous to the user or those around them, take care during use.Instructions
Basic Guidelines
- You'll need an image printed from the sawgrass_sg400_sublimation_printer
- Make sure the handle is lifted up.
- Plug in with kettle lead.
- Turn the heat press on.
- The temperature will be dependant on which fabric you are printing on. It printed best between 180 - 200 degrees for one user. You can manually change the temperature using the up and down arrows on the left-hand screen.
- Lay the fabric on the press, with the side you want to press on facing up.
- Lay the print plastic/shiny side down on the fabric.
- Pull the handle down until it locks.
- The amount of time you press for will also depend on which fabric you are printing on. one user found it printed best for between 40 - 55 seconds.
- Pull the handle up. Wait for the fabric to cool for a couple of minutes. Peel off the plastic/paper.
- REMEMBER: TURN THE HEAT PRESS OFF WHEN FINISHED AND REPLACE BACK ON THE TOOLS & EQUIPMENT SHELF.