Heat Press - HP3804

This equipment is hazardous to the user or those around them, take care during use.

Instructions

You'll need an image printed from the sawgrass_sg400_sublimation_printer
Make sure the handle is lifted up.
Plug in with kettle lead.
Turn the heat press on.
The temperature will be dependant on which fabric you are printing on. It printed best between 180 - 200 degrees for one user. You can manually change the temperature using the up and down arrows on the left-hand screen.
Lay the fabric on the press, with the side you want to press on facing up.
Lay the print plastic/shiny side down on the fabric.
Pull the handle down until it locks.
The amount of time you press for will also depend on which fabric you are printing on. one user found it printed best for between 40 - 55 seconds.
Pull the handle up. Wait for the fabric to cool for a couple of minutes. Peel off the plastic/paper.
REMEMBER: TURN THE HEAT PRESS OFF WHEN FINISHED AND REPLACE BACK ON THE TOOLS & EQUIPMENT SHELF.