Differences

This shows you the differences between two versions of the page.

--- equipment:woodshop:belt-sander [2023/02/19 20:11] – matt
+++ equipment:woodshop:belt-sander [2024/11/19 21:42] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-======Sander/Linisher - Clarke CS6-9C======
+======Belt & Disc Sander - Clarke CS6-9C======
+{{:equipment:woodshop:belt-sander.jpg?600|}}
 <callout title="Laceration / Entanglement" type="warning" icon="true"> This equipment is hazardous to the user or those around them, take care during use.</callout>
 <callout title="PPE Required" type="primary" icon="true"> This equipment requires the use of eye protection / hearing protection / respiratory protection during use. </callout>
-{{:equipment:woodshop:belt-sander.jpg?400|}}
+=== Specification ===
+  * 750 Watts (1.0hp) 230V induction motor.
+  * 6“ x 48” belt tilts & locks at any angle from 0 to 90° with spring adjuster to regulate belt tension.
+  * 9“ (230mm) sanding disc
+  * 190mm x 317mm sanding table that is adjustable between 0 & 45°. Can be used with either sanding belt or disc.
+  * Complete with finger guard on belt, full disc guarding & mitre fence (part code ZHTCS6962) on sanding table.
 ===== Instructions =====
 === Basic Guidelines ===
-  * dont use gloves or anything that could get caught in the spinning mechanism
+  * Always turn on the extraction system and open the gate to the sander before use.
-  * dont sand your fingers off
+  * Don't use gloves or anything that could get caught in the spinning mechanism.
-  * if you're sanding something particularly dusty, respiratory protection is highly advised, as is the extraction.
+  * Be careful not to sand your fingers, consider using mole grips of pliers to hold smaller parts.
+  * if you're sanding something particularly dusty, respiratory protection is highly advised.
-=== tool specs and useful links ===
+=== Belt cleaning ===
+This is the cleaning rubber for the sander, it usually lives on the wall behind the sander. Use it whenever the abrasive sheet is clogged up with wood dust, and you will find that you get better abrasion. To use, touch against the moving belt or disc as shown for a few seconds.
+{{:equipment:woodshop:img_0225.jpg|}}
-Watts (1.0hp) 230V induction motor
+=== Changing the Belt and disc - instructions ===
-“ x 48” belt tilts & locks at any angle from 0 to 90°
+??? To write.
-“ (230mm) sanding disc
-    Spring adjuster to regulate belt tension
-mm x 317mm sanding table that is adjustable between 0 & 45°. Can be used with either sanding belt or disc.
-    Complete with finger guard on belt, full disc guarding & mitre fence (part code ZHTCS6962) on sanding table.
-Consumables for the belt sander:
+=== Consumables ===
-discs
+Discs
 [[https://www.machinemart.co.uk/p/sanding-disc-for-cs6-9bd-coarse-pk5/|Sanding Disc for CS6-9C Coarse (Pk5) - £7.19]]
@@ Line 32: / Line 38: @@
 [[https://www.machinemart.co.uk/p/sanding-disc-for-cs6-9bd-fine-pk5/|Sanding Disc for CS6-9C Fine (Pk5) - £7.19 ]]
-belts
+Belts
 [[https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-coarse-pk5/|6"x 48" Sanding Belt for CS6-9BD Coarse (Pk5) - £15.59]]
-[[https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-medium-pk5/|6"x 48" Sanding Belt for CS6-9BD Medium(Pk5) - £15.59 ]]
+[[https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-medium-pk5/|6"x 48" Sanding Belt for CS6-9BD Medium (Pk5) - £15.59 ]]
-[[https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-fine-pk5/|6"x 48" Sanding Belt for CS6-9BD Fine(Pk5) - £14.39 ]]
+[[https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-fine-pk5/|6"x 48" Sanding Belt for CS6-9BD Fine (Pk5) - £14.39 ]]