Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
equipment:metalshop:titanpillardrill [2023/02/22 21:01] – created drewequipment:metalshop:titanpillardrill [2024/11/19 21:42] (current) – external edit 127.0.0.1
Line 3: Line 3:
 <callout title="Crush / Entanglement" type="warning" icon="true"> This equipment is hazardous to the user or those around them, take care during use.</callout> <callout title="Crush / Entanglement" type="warning" icon="true"> This equipment is hazardous to the user or those around them, take care during use.</callout>
    
-<callout title="PPE Required" type="primary" icon="true"> This equipment requires the use of eye protection & hearing protection and may require respiratory protection during use.</callout>+<callout title="PPE Required" type="primary" icon="true"> This equipment requires the use of eye protection and may require hearing protection and respiratory protection during use.</callout>
  
 Titan Bench pillar drill Titan Bench pillar drill
-1/4 HP 240 volt single phase motor+??? HP 240 volt single phase motor
  
 ===Risk assessment=== ===Risk assessment===
 TBC TBC
- 
-===Usage Notes=== 
- 
-the motor pulley is not the correct one for the drill so don't attempt to change the speed. 
- 
-===Manuals=== 
  
  
Line 33: Line 27:
  
 === Usage === === Usage ===
-  - Move the working platform Up or down by loosening the handle attached to the left of the platform.+  - Move the working platform up or down by loosening the handle attached to the left of the platform.
   - Insert the relevant drill bit. Ensure the shank of the drill bit goes all the way into the chuck.   - Insert the relevant drill bit. Ensure the shank of the drill bit goes all the way into the chuck.
   - twist tighten the chuck, no key is required.    - twist tighten the chuck, no key is required. 
-  - Raise the working platform to the drill bit and align the hole in the platform with the drill bit. This is so that the surface won't be damaged if you do drill through the work piece. +  - Align the hole in the platform with the drill bit. This is so that the surface won't be damaged if you do drill through the work piece. 
-   - Secure the work piece onto the platform with clamps in suitable places. If the piece is too small, use the metal vice clamp to hold the piece so your hands don't have to.+  - Secure the work piece onto the platform with clamps or using the metal vice clamp to hold the piece so your hands don't have to.
   - Turn on machine with the start button on the side of the machine.   - Turn on machine with the start button on the side of the machine.
   - Slowly use the three handles on the side to lower the drill into the work piece.   - Slowly use the three handles on the side to lower the drill into the work piece.
-  - Carefully use the handles to remove the drill bit from the work piece - do **not** just let go of the handles.+  - Rotate the handles **slowly** to remove the drill bit upwards from the work piece - do **not** just let go of the handles. 
 + 
 +=== Changing Speed === 
 +?????
  
 === Tidying up === === Tidying up ===
Line 47: Line 44:
   * Brush the drill and platform to remove excess material. Sweep area around drill press and bin the rubbish.   * Brush the drill and platform to remove excess material. Sweep area around drill press and bin the rubbish.
  
 +===Manuals===
 +????
  
  • equipment/metalshop/titanpillardrill.1677099703
  • Last modified: 5 months ago
  • (external edit)