Old Revisions

These are the older revisons of the current document. To revert to an old revision, select it from below, click Edit this page and save it.

2026/10/23 19:59 Using Large Bits on A Pillar Drill – ↷ Page moved from equipment:metalworkshop:pillardrill:usinglargebits to equipment:metalshop:pillardrill:usinglargebits ralawrence +13.2 KB (current)
2026/10/23 19:59 Using Large Bits on A Pillar Drill – removed - external edit (Unknown date) 127.0.0.1 ±0 B
2026/10/23 19:58 equipment:metalworkshop:pillardrill:usinglargebits – ↷ Page moved from equipment:metalworkshopshop:pillardrill:usinglargebits to equipment:metalworkshop:pillardrill:usinglargebits ralawrence +13.2 KB
2026/10/23 19:58 equipment:metalworkshop:pillardrill:usinglargebits – removed - external edit (Unknown date) 127.0.0.1 ±0 B
2026/10/23 19:58 equipment:metalworkshopshop:pillardrill:usinglargebits – ↷ Page moved from equipment:utilityworkshopshop:pillardrill:usinglargebits to equipment:metalworkshopshop:pillardrill:usinglargebits ralawrence +13.2 KB
2026/10/23 19:58 equipment:metalworkshopshop:pillardrill:usinglargebits – removed - external edit (Unknown date) 127.0.0.1 ±0 B
2026/10/23 19:57 equipment:utilityworkshopshop:pillardrill:usinglargebits – ↷ Page moved from equipment:utilityworkshoplshop:pillardrill:usinglargebits to equipment:utilityworkshopshop:pillardrill:usinglargebits ralawrence +13.2 KB
2026/10/23 19:57 equipment:utilityworkshopshop:pillardrill:usinglargebits – removed - external edit (Unknown date) 127.0.0.1 ±0 B
2026/10/23 19:54 equipment:utilityworkshoplshop:pillardrill:usinglargebits – ↷ Page moved from equipment:metalshop:titanpillardrill:usinglargebits to equipment:utilityworkshoplshop:pillardrill:usinglargebits ralawrence +13.2 KB
2026/10/23 19:54 equipment:utilityworkshoplshop:pillardrill:usinglargebits – removed - external edit (Unknown date) 127.0.0.1 ±0 B
2026/06/29 18:08 equipment:metalshop:titanpillardrill:usinglargebits – [5. Clean the Pillar Drill.] ralawrence -4 B
2026/06/29 18:08 equipment:metalshop:titanpillardrill:usinglargebits – [4. Return it to its holder on the wall.] ralawrence -4 B
2026/06/29 18:08 equipment:metalshop:titanpillardrill:usinglargebits – [3. Remove the drill bit and clean it. Be careful—it may be hot.] ralawrence -4 B
2026/06/29 18:07 equipment:metalshop:titanpillardrill:usinglargebits – [2. Deburr the hole.] ralawrence -4 B
2026/06/29 18:07 equipment:metalshop:titanpillardrill:usinglargebits – [1. Turn off the drill and wait for it to stop spinning.] ralawrence -4 B
2026/06/29 18:07 equipment:metalshop:titanpillardrill:usinglargebits – [Finishing] ralawrence -2 B
2026/06/29 18:07 equipment:metalshop:titanpillardrill:usinglargebits – [9. If drilling all the way through, go very slowly when breaking through.] ralawrence -4 B
2026/06/29 18:07 equipment:metalshop:titanpillardrill:usinglargebits – [8. Frequently lift the drill bit back up to allow chips to be cleared and add lubricant.] ralawrence -4 B
2026/06/29 18:06 equipment:metalshop:titanpillardrill:usinglargebits – [7. Clean away chips with a brush. Never use your fingers.] ralawrence -4 B
2026/06/29 18:06 equipment:metalshop:titanpillardrill:usinglargebits – [6. Start by pecking the metal. Drill down about 5mm and then extract the bit.] ralawrence -4 B