Differences

This shows you the differences between two versions of the page.

--- equipment:metalshop:metallathe:metallathemaintainance [2024/01/10 16:40] – drew
+++ equipment:metalshop:metallathe:metallathemaintainance [2024/11/19 21:42] (current) – external edit 127.0.0.1
@@ Line 35: / Line 35: @@
 If you have any doubt, please ask, other members are happy to help.
-===== Post Use - Cleaning Routine =====
+===== Post Use - Routine =====
+==== 1 Cleaning ====
 {{:equipment:metalshop:metallathe:pxl_20220403_093743747.jpg?nolink&800|}}
@@ Line 48: / Line 49: @@
   * Clean floor around machine. You may need to use the emergency spill kit on corner of bench if there were oil or coolant spills.
-==== Post Use - Lubrication  ====
+==== 2 Lubrication  ====
 {{:equipment:metalshop:metallathe:screenshot_2023-03-23_113516.png?direct|}}
@@ Line 55: / Line 56: @@
 You can’t really over oil a lathe. It must have the correct types of oil used in the correct locations.
-{{youtube>v=kIgWuDcb268?large}}
+{{youtube>kIgWuDcb268?large}}
 The small plastic oil can that lives on the lathe contains "ways oil" or more formally type 1 Slideways Oil ISO 68. If it is empty, please fill it up, spare Slideway Oil is in the COSHH cupboard.
@@ Line 62: / Line 63: @@
 Wipe a small amount of oil on the chuck, the ways and any other bits of bare metal that look like they might be thirsty.
-==== Post Use - Finishing Up ====
+==== 3 Finishing Up ====
   - Turn the lathe off and replace the padlock.