Differences

This shows you the differences between two versions of the page.

--- equipment:metalshop:expansion2026 [2026/01/24 17:56] – robert.simpson190
+++ equipment:metalshop:expansion2026 [2026/03/22 11:27] (current) – robert.simpson190
@@ Line 17: / Line 17: @@
 **Paint walls**
        Remove raw plugs etc. 95% done
-       Fill screw holes
+       Fill screw holes. Done.
-       Get paint and brushes
+       Get paint and brushes. Paint in workshop. Bring your own brushes.
-       Paint them
+       Paint them. As of 2026-03-21, about 90% done (of old woodshop). Area around the door to the new woodshop still to do.
 **Paint floor**
        Prepare floor. Remove tape etc.
-       Get paint and brushes
+       Get paint and brushes. 2.5L of floor paint in workshop.
-       Paint first half
+       Paint first half. Suggest we first paint the area where the CNC will go, and then move the CNC.
        Paint second half
@@ Line 47: / Line 47: @@
   * Duncan prefers to keep the door into his half of the building accessible.
   * Lathe positioned with access to feet, 30cm to the right to allow for maintenance, 50-60cm to the left to allow for access to the gears and for long workpieces, 60cm behind to allow space for a coolant system. 80cm working area in front.
+  * We need to ensure there is access to the extractor fan connected to the Laser Cutter.
 [[https://wiki.bristolhackspace.org/resources/install_standard]]