Differences

This shows you the differences between two versions of the page.

--- resources:dust_ports [2024/08/14 09:48] – samp20
+++ resources:dust_ports [2024/11/19 21:42] (current) – external edit 127.0.0.1
@@ Line 5: / Line 5: @@
 {{ :resources:dust-port-dimensions-generic.svg |}}
-^ Nominal port size ^ A ^ B ^ C ^ D ^ E ^
+^ Nominal port size ^ A ^ B ^ C ^ D ^
-| 100mm   | 35mm | 100mm | 40mm | 102mm | 98mm |
+| 100mm   | 35mm | minimum 5mm | 102mm | 98mm |
-| 65mm    | TBD  | 65mm  | TBD | 67mm  | 63mm |
+| 65mm    | 35mm  | minimum 5mm | 67mm  | 63mm |
-| 50mm    | TBD  | 50mm  | TBD | 52mm  | 48mm |
+| 50mm    | 35mm  | minimum 5mm | 52mm  | 48mm |
-The male version of the port may optionally have a matching taper to the female version, however enough clearance should be allowed behind the taper to ensure both sides engage sufficiently for a secure fit.
+Upstream ports (towards the extractor) shall be male. When designing tool adapters, these should have the female version of the port (and usually 50mm).