Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
| manual:workshops [2024/11/19 21:42] – external edit 127.0.0.1 | manual:workshops [2024/12/13 18:16] (current) – matt | ||
|---|---|---|---|
| Line 8: | Line 8: | ||
| * If you're doing woodwork, you must do it in the Woodshop, This is to prevent rest of the space getting covered in sawdust. | * If you're doing woodwork, you must do it in the Woodshop, This is to prevent rest of the space getting covered in sawdust. | ||
| * Our bins don't accept wood, MDF, plywood, etc, so you need to take all your waste wood away with you. The only exception to this rule is bagged sawdust. | * Our bins don't accept wood, MDF, plywood, etc, so you need to take all your waste wood away with you. The only exception to this rule is bagged sawdust. | ||
| - | * If you are using a machines which is connected to the permanent extraction, or using a hand-held sander, you must use the dust collector too. | + | * If you are using a machines which is connected to the dust collection system, or if you are using using a hand-held sander, you must use the dust collection system. |
| * If the dust collector is full, bag up the waste and put it into the building' | * If the dust collector is full, bag up the waste and put it into the building' | ||
| * Sweep up and bin any remaining sawdust, and put tools away in their correct places. | * Sweep up and bin any remaining sawdust, and put tools away in their correct places. | ||
| Line 14: | Line 14: | ||
| ==== Metalshop ==== | ==== Metalshop ==== | ||
| - | * If you're doing metal work, you must do it in the Metalshop. This is to prevent the rest of the space getting covered in oil, swarf, | + | * If you're doing metal work, you must do it in the Metalshop. This is to prevent the rest of the space getting covered in oil, swarf, |
| - | * Our bins don't accept large pieces of metal so you need to take this kind of waste waste away with you. There are some material specific | + | * Our bins don't accept large pieces of metal, so you need to take this kind of waste waste away with you. There are some material-specific bins by the lathe for swarf, chips etc. |
| - | * If you are using machines which may produce sparks ensure the area is clear of any flammable materials before use. | + | |