Consumables

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Consumables =====

Consumables are common useful items, materials, and other supplies that hackspace aims to keep in stock for everyone's convenience. 

Consumables are for the reasonable light use of all members in their projects. If you are using a large proportion of our stock of any item, you should consider buying it it yourself rather than depleting the Hackspace's communal supply. Common janitorial, maintenance, and PPE items are also classed as consumables.

If you spot that we are getting low on a consumable item, you can post an entry to [[https://bristolhackspace.discourse.group/t/consumables-replacement-requests/2303|this thread]] requesting replenishment and one of the committee will restock the item(s). 

Any overstock of consumables are stored in the consumables cabinet in the corridor. Please check here before posting.

If you think a new item should be added to the consumables list, please request on the same thread and the committee will vote to get this consumable approved. A majority vote from the committee is required for this approval to pass.

==== Consumables List ====
=== CNC Room ===
^Item ^Notes ^Known good supplier^
|Isopropyl Alcohol|
|Distilled water|
|Glue stick|
|Double sided tape|
|Paper towel|
|Loo roll|

=== Hallway ===
^Item ^Notes ^Known good supplier^
|First aid|
|Eye Wash|
|Washing up liquid|
|Bin bags|
|Axminster Extraction Bags||[[https://www.axminstertools.com/axminster-workshop-waste-sacks-760-x-1-065mm-blue-pkt-10-109644|Axminster]]|
|Soap|
|Loo cleaner|
|Bleach| 

===Main room===
^Item ^Notes ^Known good supplier^
|Printer paper|
|Solder||https://www.toolstation.com/lead-free-flux-cored-solder/p97854|
|Heat shrink|
|Wire|
|De-solder braid| 
|Pens| 
|pencils|
|Sublimation paper and ink|Sawgrass SG400|
|Laser toner|Brother MFC-L3750CDW|[[https://goinks.co.uk/1-go-inks-set-of-4-laser-toner-cartridges-to-replace-brother-tn247-xl-capacity-compatible-non-oem-for-brother-dcp-mfc-hl-printers|Goinks]]|
|Label printer stickers (project boxes/short term storage)| 62mm x 100mm for Brother QL570|
|Label printer tape| Tze 12mm tape |

===Wood shop===
^Item ^Notes ^Known good supplier^
|Wood screws|4x20, 4x25, 4x30,4x35, 4x40 and 4x50 all PZ2|
|Disposable gloves|
|Disposable masks|
|Eye protection|
|Hearing protection|
|Drill bits|3, 4, 5, 6, 8 and 10mm brad point bits|
|Forsner bits|10 - 50 mm|
|Screwdriver bits|PZ2, PZ3, T15, T20, T25, S4.5, S5.5|
|Hole bits|21, 25, 29, 38, 44, 51 and 64 mm diameter|
|CNC Flat Endmill 1/4 Inch Cut - 1/4 Inch Shank	Extended Reach|Carbide3D Bit Equilivent 201|https://ooznest.co.uk/product/solid-carbide-end-mills-square-2flute-up/|
|CNC Flat Endmill 1/8 Inch Cut - 1/8 Inch Shank	Standard|Carbide3D Bit Equilivent 102|https://ooznest.co.uk/product/solid-carbide-end-mills-square-2flute-up/|
|CNC Ball endmill 1/4 Inch Cut - 1/4 Inch Shank	Standard|Carbide3D Bit Equilivent 202|https://ooznest.co.uk/product/solid-carbide-ball-end-mills-2-flute-up-cut-uk/|
|CNC Ball endmill 1/8 Inch Cut - 1/8 Inch Shank	Standard|Carbide3D Bit Equilivent 101|https://ooznest.co.uk/product/solid-carbide-ball-end-mills-2-flute-up-cut-uk/|
|CNC V-Bit 90 Degree|SKU 45704 - Carbide3D Bit Equilivent 301|https://ooznest.co.uk/product/amana-tool-carbide-tipped-end-mills-v-groove/|
|CNC V-Bit 60 Degree|SKU 45705 - Carbide3D Bit Equilivent 302|https://ooznest.co.uk/product/amana-tool-carbide-tipped-end-mills-v-groove/|
|Band saw blades|Standard blade 1/2", length 93 1/4" / 2370mm 6 tpi. More info on the [[equipment:woodshop:bandsaw|bandsaw page]] | [[https://tuffsaws.co.uk/index.php?route=product/product&product_id=126|TuffSaws]]|
|Sand paper rolls| Rolls of 60, 120, 180 and 240 grit|https://www.toolstation.com/aluminium-oxide-sanding-roll-115mm/p52521|
|Disks/pads for random orbital sander| 60, 120, 180 and 240 grit 125mm |https://www.toolstation.com/sanding-disc-125mm/p11975|
|Masking tape|
|Carpenters pencils|
|Belt sander belts | 6" x 48" (150 x 1220mm) | Machine Mart https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-medium-pk5/|
|Belt sander disks | 230mm diameter | Machine Mart https://www.machinemart.co.uk/p/sanding-disc-for-cs6-9bd-medium-pk5/|
|Mitre Saw Blades| 255mm multi material and fine wood blades. 25.4mm bore|
|Table Saw Blades| 210mm. 30mm bore. 2.4mm thickness. For example Trend CSB/21048 |https://www.toolstation.com/trend-craft-circular-saw-blade/p24185|
|Machine Wax||[[https://www.axminstertools.com/axminster-machine-wax-105806|Axminster]]|

===Metal Shop===
^Item ^Notes ^Known good supplier^
|Drill bits|3, 4, 5, 6, 8 and 10mm|
|step drill|
|Hacksaw blades|
|Bandsaw blades|1638mm (64 1/2") x 1/2" 14 tpi|https://tuffsaws.co.uk/index.php?route=product/product&product_id=479|
|Angle grinder disks||
|Bench Grinder wheels| Coarse on the left, fine on the right |
|Sorby sharpening belts|60,120 and 240 grit|
|Hex & Torx keys||
|Screwdrivers||
|WD-40||
|Grease||
|Isopropyl Alcohol||
|Lathe lubricants||
|Lathe Bits| Parting off, centre drills, indexable carbide bits|