Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
manual:consumables [2026/03/13 13:42] – davemanual:consumables [2026/08/16 21:07] (current) – dave
Line 26: Line 26:
 |Eye Wash| |Eye Wash|
 |Washing up liquid| |Washing up liquid|
 +|Disposable gloves|
 |Bin bags| |Bin bags|
-|Axminster Extraction Bags||[[https://www.axminstertools.com/axminster-workshop-waste-sacks-760-x-1-065mm-blue-pkt-10-109644|Axminster]]|+|Axminster Extraction Bags Blue||[[https://www.axminstertools.com/axminster-workshop-waste-sacks-760-x-1-065mm-blue-pkt-10-109644|Axminster Blue]]| 
 +|Axminster Extraction Bags Orange||[[https://www.axminstertools.com/axminster-workshop-waste-sacks-785-x-940mm-orange-pkt-10-109781|Axminster Orange]]| 
 +|Belt sander belts | 6" x 48" (150 x 1220mm) | Machine Mart https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-medium-pk5/| 
 +|Belt sander disks | 230mm diameter | Machine Mart https://www.machinemart.co.uk/p/sanding-disc-for-cs6-9bd-medium-pk5/| 
 +|Mitre Saw Blades| 255mm 25.4mm bore|https://www.saxtonblades.co.uk/product/tct-circular-blade-255mm-x-60t-x-25-4mm-bore/| 
 +|Table Saw Blades| 210mm 30mm bore 2.4mm thickness |https://www.toolstation.com/trend-craft-circular-saw-blade/p24185| 
 +|Circular Saw Blades| 184mm 16mm bore |https://www.screwfix.com/p/dewalt-hardwood-construction-circular-saw-blade-184mm-x-16mm-18t/646th , https://www.saxtonblades.co.uk/product/tct-circular-blade-184mm-x-40t-x-20mm-bore-16mm-ring| 
 +|Drill bits|3, 4, 5, 6, 8 and 10mm brad point bits| 
 +|Band saw blades|Standard blade 1/2", length 93 1/4" / 2370mm 6 tpi. More info on the [[equipment:woodshop:bandsaw|bandsaw page]] | [[https://tuffsaws.co.uk/index.php?route=product/product&product_id=126|TuffSaws]]|
 |Soap| |Soap|
 |Loo cleaner| |Loo cleaner|
Line 35: Line 44:
 ^Item ^Notes ^Known good supplier^ ^Item ^Notes ^Known good supplier^
 |Printer paper| |Printer paper|
-|Solder||https://www.toolstation.com/lead-free-flux-cored-solder/p97854|+|Solder||https://cpc.farnell.com/duratool/d01685/solder-sn99-3-cu0-7-0-7mm-100g/dp/SD01539|
 |Heat shrink| |Heat shrink|
 |Wire| |Wire|
-|De-solder braid| +|De-solder braid 1.5mm||https://cpc.farnell.com/chip-quik/solderwick1-5/solder-wick-1-5mm-5-no-clean-yellow/dp/SD03513| 
-|Flux|+|De-solder braid 2.8mm||https://cpc.farnell.com/chip-quik/solderwick2-8/solder-wick-2-8mm-5-no-clean-blue/dp/SD03515| 
 +|Flux||https://cpc.farnell.com/mg-chemicals/8351-125ml/wave-soldering-flux-bottle-125ml/dp/SD03103|
 |Pens|  |Pens| 
 |pencils| |pencils|
Line 51: Line 61:
 ^Item ^Notes ^Known good supplier^ ^Item ^Notes ^Known good supplier^
 |Wood screws|4x20, 4x25, 4x30,4x35, 4x40 and 4x50 all PZ2| |Wood screws|4x20, 4x25, 4x30,4x35, 4x40 and 4x50 all PZ2|
-|Disposable gloves| 
 |Disposable masks| |Disposable masks|
 |Eye protection| |Eye protection|
 |Hearing protection| |Hearing protection|
-|Drill bits|3, 4, 5, 6, 8 and 10mm brad point bits| 
 |Dowels||https://www.toolstation.com/wooden-dowel/p75364| |Dowels||https://www.toolstation.com/wooden-dowel/p75364|
-|Forsner bits|10 - 50 mm|+|Forsner bits|10 - 50 mm in 5mm increments|
 |Screwdriver bits|PZ2, PZ3, T15, T20, T25, S4.5, S5.5| |Screwdriver bits|PZ2, PZ3, T15, T20, T25, S4.5, S5.5|
-|Hole bits|21, 25, 29, 38, 44, 51 and 64 mm diameter| +|CNC Flat Endmill 1/4 Inch Cut - 1/4 Inch Shank Extended Reach|Carbide3D Bit Equivalent 201|https://ooznest.co.uk/product/1-4-up-cut-standard-general-purpose-square-end-router-bit-1-4-shank/| 
-|CNC Flat Endmill 1/4 Inch Cut - 1/4 Inch Shank Extended Reach|Carbide3D Bit Equivalent 201|https://ooznest.co.uk/product/solid-carbide-end-mills-square-2flute-up/| +|CNC Flat Endmill 1/8 Inch Cut - 1/8 Inch Shank Standard|Carbide3D Bit Equivalent 102|https://ooznest.co.uk/product/1-8-up-cut-standard-general-purpose-square-end-router-bit-1-8-shank/| 
-|CNC Flat Endmill 1/8 Inch Cut - 1/8 Inch Shank Standard|Carbide3D Bit Equivalent 102|https://ooznest.co.uk/product/solid-carbide-end-mills-square-2flute-up/| +|CNC Ball endmill 1/4 Inch Cut - 1/4 Inch Shank Standard|Carbide3D Bit Equivalent 202|https://ooznest.co.uk/product/1-4-standard-general-purpose-ball-end-router-bit-1-4-shank/| 
-|CNC Ball endmill 1/4 Inch Cut - 1/4 Inch Shank Standard|Carbide3D Bit Equivalent 202|https://ooznest.co.uk/product/solid-carbide-ball-end-mills-2-flute-up-cut-uk/| +|CNC Ball endmill 1/8 Inch Cut - 1/8 Inch Shank Standard|Carbide3D Bit Equivalent 101|https://ooznest.co.uk/product/1-8-standard-general-purpose-ball-end-router-bit-1-8-shank/| 
-|CNC Ball endmill 1/8 Inch Cut - 1/8 Inch Shank Standard|Carbide3D Bit Equivalent 101|https://ooznest.co.uk/product/solid-carbide-ball-end-mills-2-flute-up-cut-uk/| +|CNC V-Bit 90 Degree|SKU 45704 - Carbide3D Bit Equivalent 301|https://ooznest.co.uk/product/1-2-x-90-amana-tool-45704-decorative-carbide-tipped-v-groove-router-bit-1-4-shank/| 
-|CNC V-Bit 90 Degree|SKU 45704 - Carbide3D Bit Equivalent 301|https://ooznest.co.uk/product/amana-tool-carbide-tipped-end-mills-v-groove/| +|CNC V-Bit 60 Degree|SKU 45705 - Carbide3D Bit Equivalent 302|https://ooznest.co.uk/product/1-2-x-60-amana-tool-45705-decorative-carbide-tipped-v-groove-router-bit-1-4-shank/|
-|CNC V-Bit 60 Degree|SKU 45705 - Carbide3D Bit Equivalent 302|https://ooznest.co.uk/product/amana-tool-carbide-tipped-end-mills-v-groove/|+
 --- ---
 |Table router bit - 1/2 inch shank|Roundover Bit - 1/2 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-38-x-19-r-12-7mm-s-1-2-12-7mm-666055| |Table router bit - 1/2 inch shank|Roundover Bit - 1/2 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-38-x-19-r-12-7mm-s-1-2-12-7mm-666055|
 |Table router bit - 1/2 inch shank|Roundover Bit - 3/4 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-50-8-x-25-4-r-19-05mm-s-1-2-12-7mm-666150| |Table router bit - 1/2 inch shank|Roundover Bit - 3/4 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-50-8-x-25-4-r-19-05mm-s-1-2-12-7mm-666150|
-|Table router bit - 1/2 inch shank|Dovetail - 14° slope|https://www.axminstertools.com/axcaliber-dovetail-router-cutter-d-22-2-x-22-2mm-k-14-s-1-2-12-7mm-666019|+|*Table router bit - 1/2 inch shank|Dovetail - 14° slope|https://www.axminstertools.com/axcaliber-dovetail-router-cutter-d-22-2-x-22-2mm-k-14-s-1-2-12-7mm-666019|
 |Table router bit - 1/2 inch shank|Chamfer Bit - 45° 47.5mm|https://www.axminstertools.com/axcaliber-chamfer-cutter-bearing-guided-d-47-6-x-20mm-s-1-2-12-7mm-666161| |Table router bit - 1/2 inch shank|Chamfer Bit - 45° 47.5mm|https://www.axminstertools.com/axcaliber-chamfer-cutter-bearing-guided-d-47-6-x-20mm-s-1-2-12-7mm-666161|
 |Table router bit - 1/2 inch shank|Rabbeting bit with interchangeable bearings|https://www.axminstertools.com/axcaliber-rebate-cutter-set-d-34-92-x-12-7mm-s-1-2-12-7mm-666163| |Table router bit - 1/2 inch shank|Rabbeting bit with interchangeable bearings|https://www.axminstertools.com/axcaliber-rebate-cutter-set-d-34-92-x-12-7mm-s-1-2-12-7mm-666163|
 |Table router bit - 1/2 inch shank|Flush trim - 1 1/4 inch top bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutter-top-bearing-d-19-05-x-31-75mm-s-1-2-12-7mm-bearing-19mm-666090| |Table router bit - 1/2 inch shank|Flush trim - 1 1/4 inch top bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutter-top-bearing-d-19-05-x-31-75mm-s-1-2-12-7mm-bearing-19mm-666090|
 |Table router bit - 1/2 inch shank|Flush trim - 2 inch bottom bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-bottom-bearing-d-12-7-x-50-8mm-s-1-2-12-7mm-666105| |Table router bit - 1/2 inch shank|Flush trim - 2 inch bottom bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-bottom-bearing-d-12-7-x-50-8mm-s-1-2-12-7mm-666105|
-|Trim router bit - 1/4 inch shank|Roundover Bit - 3/8 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-31-75-x-15-88-r-9-53mm-s-1-4-6-35mm-666052|+|*Trim router bit - 1/4 inch shank|Roundover Bit - 3/8 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-31-75-x-15-88-r-9-53mm-s-1-4-6-35mm-666052|
 |Trim router bit - 1/4 inch shank|Roundover Bit - 1/4 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-25-4-x-11-11-r-6-35mm-s-1-4-6-35mm-666050| |Trim router bit - 1/4 inch shank|Roundover Bit - 1/4 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-25-4-x-11-11-r-6-35mm-s-1-4-6-35mm-666050|
 |Trim router bit - 1/4 inch shank|Roundover Bit  1/8 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-19-05-x-9-53-r-3-2mm-s-1-4-6-35mm-666047| |Trim router bit - 1/4 inch shank|Roundover Bit  1/8 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-19-05-x-9-53-r-3-2mm-s-1-4-6-35mm-666047|
Line 82: Line 89:
 |Trim router bit - 1/4 inch shank|Flush trim - 1 inch top bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-top-bearing-d-15-88-x-25-4mm-s-1-4-6-35mm-bearing-16mm-666109| |Trim router bit - 1/4 inch shank|Flush trim - 1 inch top bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-top-bearing-d-15-88-x-25-4mm-s-1-4-6-35mm-bearing-16mm-666109|
 |Trim router bit - 1/4 inch shank|Flush trim - 1 inch bottom bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-bottom-bearing-d-12-7-x-25-4mm-s-1-4-6-3mm-666101| |Trim router bit - 1/4 inch shank|Flush trim - 1 inch bottom bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-bottom-bearing-d-12-7-x-25-4mm-s-1-4-6-3mm-666101|
-|Trim router bit - 1/4 inch shank|Flush trim - 10mm bottom bearing|https://www.axminstertools.com/axcaliber-milling-cutter-with-top-bearing-952561|+|Trim router bit - 1/4 inch shank|Milling cutter - 10mm top bearing|https://www.axminstertools.com/axcaliber-milling-cutter-with-top-bearing-952561|
 --- ---
 |Forstner Bit 6mm shank|10mm|https://www.axminstertools.com/axcaliber-forstner-bit-10mm-501920| |Forstner Bit 6mm shank|10mm|https://www.axminstertools.com/axcaliber-forstner-bit-10mm-501920|
Line 94: Line 101:
 |Forstner Bit 10mm shank|50mm|https://www.axminstertools.com/axcaliber-forstner-bit-50mm-501940| |Forstner Bit 10mm shank|50mm|https://www.axminstertools.com/axcaliber-forstner-bit-50mm-501940|
 --- ---
-|Band saw blades|Standard blade 1/2", length 93 1/4" / 2370mm 6 tpi. More info on the [[equipment:woodshop:bandsaw|bandsaw page]] | [[https://tuffsaws.co.uk/index.php?route=product/product&product_id=126|TuffSaws]]| 
 |Sand paper rolls| Rolls of 60, 120, 180 and 240 grit|https://www.toolstation.com/aluminium-oxide-sanding-roll-115mm/p52521| |Sand paper rolls| Rolls of 60, 120, 180 and 240 grit|https://www.toolstation.com/aluminium-oxide-sanding-roll-115mm/p52521|
 |Disks/pads for random orbital sander| 60, 120, 180 and 240 grit 125mm |https://www.toolstation.com/sanding-disc-125mm/p11975| |Disks/pads for random orbital sander| 60, 120, 180 and 240 grit 125mm |https://www.toolstation.com/sanding-disc-125mm/p11975|
Line 100: Line 106:
 |Carpenters pencils| |Carpenters pencils|
 |Compass| |Compass|
-|Belt sander belts | 6" x 48" (150 x 1220mm) | Machine Mart https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-medium-pk5/| 
-|Belt sander disks | 230mm diameter | Machine Mart https://www.machinemart.co.uk/p/sanding-disc-for-cs6-9bd-medium-pk5/| 
-|Mitre Saw Blades| 255mm multi material and fine wood blades. 25.4mm bore| 
-|Table Saw Blades| 210mm. 30mm bore. 2.4mm thickness. For example Trend CSB/21048 |https://www.toolstation.com/trend-craft-circular-saw-blade/p24185| 
-|Machine Wax||[[https://www.axminstertools.com/axminster-machine-wax-105806|Axminster]]| 
-|Trend T32 Vacuum Dust Bags|| [[https://www.ebay.co.uk/itm/387639909255|Dust bags]]| 
  
 ===Metal Shop=== ===Metal Shop===
 ^Item ^Notes ^Known good supplier^ ^Item ^Notes ^Known good supplier^
-|Drill bits|3, 4, 5, 6, 8 and 10mm|+|Drill bits|2-10mm in half sizes|
 |step drill| |step drill|
 |Hacksaw blades| |Hacksaw blades|
 |Bandsaw blades|1638mm (64 1/2") x 1/2" 14 tpi|https://tuffsaws.co.uk/index.php?route=product/product&product_id=479| |Bandsaw blades|1638mm (64 1/2") x 1/2" 14 tpi|https://tuffsaws.co.uk/index.php?route=product/product&product_id=479|
-|Angle grinder disks|| 
-|Bench Grinder wheels| Coarse on the left, fine on the right | 
-|Sorby sharpening belts|60,120 and 240 grit Aluminium - A6 and A16 Trizact|[[https://www.ebay.co.uk/itm/126518368087?_skw=robert+sorby+pro+edge+belts|eBay]]| 
 |Hex & Torx keys|| |Hex & Torx keys||
 |Screwdrivers|| |Screwdrivers||
 |Lathe Bits| Parting off, centre drills, indexable carbide bits| |Lathe Bits| Parting off, centre drills, indexable carbide bits|
  
-===COSH Cupboard===+===COSHH Cupboard===
 ^Item ^Notes ^Known good supplier^ ^Item ^Notes ^Known good supplier^
 |WD-40|| |WD-40||
Line 128: Line 125:
 |5 minute epoxy||https://www.amazon.co.uk/dp/B0DLG7H146?psc=1&smid=A7EIUXFMUPDNJ| |5 minute epoxy||https://www.amazon.co.uk/dp/B0DLG7H146?psc=1&smid=A7EIUXFMUPDNJ|
 |Super glue and activator||https://www.amazon.co.uk/Soudal-VISCOSITY-SUPERGLUE-ACTIVATOR-Bonding/dp/B075C6M4X7| |Super glue and activator||https://www.amazon.co.uk/Soudal-VISCOSITY-SUPERGLUE-ACTIVATOR-Bonding/dp/B075C6M4X7|
 +|Machine Wax||[[https://www.axminstertools.com/axminster-machine-wax-105806|Axminster]]|
  
 ===Hot Works=== ===Hot Works===
 ^Item ^Notes ^Known good supplier^ ^Item ^Notes ^Known good supplier^
 |Flux Welding Wire|SIP MIG Gasless Flux Cord Welding Wire|https://www.toolstation.com/sip-mig-gasless-flux-cord-welding-wire/p13760| |Flux Welding Wire|SIP MIG Gasless Flux Cord Welding Wire|https://www.toolstation.com/sip-mig-gasless-flux-cord-welding-wire/p13760|
 +|Angle grinder disks||
 +|Bench Grinder wheels| Coarse on the left, fine on the right |
 +|Sorby sharpening belts|60,120 and 240 grit Aluminium - A6 and A16 Trizact|[[https://www.ebay.co.uk/itm/126518368087?_skw=robert+sorby+pro+edge+belts|eBay]]|
  
 ===Craft Room=== ===Craft Room===
  • manual/consumables.1773409344
  • Last modified: 5 months ago
  • by dave