Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
manual:consumables [2025/09/02 09:12] – davemanual:consumables [2026/01/29 08:58] (current) – dave
Line 60: Line 60:
 |Screwdriver bits|PZ2, PZ3, T15, T20, T25, S4.5, S5.5| |Screwdriver bits|PZ2, PZ3, T15, T20, T25, S4.5, S5.5|
 |Hole bits|21, 25, 29, 38, 44, 51 and 64 mm diameter| |Hole bits|21, 25, 29, 38, 44, 51 and 64 mm diameter|
-|CNC Flat Endmill 1/4 Inch Cut - 1/4 Inch Shank Extended Reach|Carbide3D Bit Equilivent 201|https://ooznest.co.uk/product/solid-carbide-end-mills-square-2flute-up/| +|CNC Flat Endmill 1/4 Inch Cut - 1/4 Inch Shank Extended Reach|Carbide3D Bit Equivalent 201|https://ooznest.co.uk/product/solid-carbide-end-mills-square-2flute-up/| 
-|CNC Flat Endmill 1/8 Inch Cut - 1/8 Inch Shank Standard|Carbide3D Bit Equilivent 102|https://ooznest.co.uk/product/solid-carbide-end-mills-square-2flute-up/| +|CNC Flat Endmill 1/8 Inch Cut - 1/8 Inch Shank Standard|Carbide3D Bit Equivalent 102|https://ooznest.co.uk/product/solid-carbide-end-mills-square-2flute-up/| 
-|CNC Ball endmill 1/4 Inch Cut - 1/4 Inch Shank Standard|Carbide3D Bit Equilivent 202|https://ooznest.co.uk/product/solid-carbide-ball-end-mills-2-flute-up-cut-uk/| +|CNC Ball endmill 1/4 Inch Cut - 1/4 Inch Shank Standard|Carbide3D Bit Equivalent 202|https://ooznest.co.uk/product/solid-carbide-ball-end-mills-2-flute-up-cut-uk/| 
-|CNC Ball endmill 1/8 Inch Cut - 1/8 Inch Shank Standard|Carbide3D Bit Equilivent 101|https://ooznest.co.uk/product/solid-carbide-ball-end-mills-2-flute-up-cut-uk/| +|CNC Ball endmill 1/8 Inch Cut - 1/8 Inch Shank Standard|Carbide3D Bit Equivalent 101|https://ooznest.co.uk/product/solid-carbide-ball-end-mills-2-flute-up-cut-uk/| 
-|CNC V-Bit 90 Degree|SKU 45704 - Carbide3D Bit Equilivent 301|https://ooznest.co.uk/product/amana-tool-carbide-tipped-end-mills-v-groove/| +|CNC V-Bit 90 Degree|SKU 45704 - Carbide3D Bit Equivalent 301|https://ooznest.co.uk/product/amana-tool-carbide-tipped-end-mills-v-groove/| 
-|CNC V-Bit 60 Degree|SKU 45705 - Carbide3D Bit Equilivent 302|https://ooznest.co.uk/product/amana-tool-carbide-tipped-end-mills-v-groove/|+|CNC V-Bit 60 Degree|SKU 45705 - Carbide3D Bit Equivalent 302|https://ooznest.co.uk/product/amana-tool-carbide-tipped-end-mills-v-groove/| 
 +--- 
 +|Table router bit - 1/2 inch shank|Roundover Bit - 1/2 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-38-x-19-r-12-7mm-s-1-2-12-7mm-666055| 
 +|Table router bit - 1/2 inch shank|Roundover Bit - 3/4 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-50-8-x-25-4-r-19-05mm-s-1-2-12-7mm-666150| 
 +|Table router bit - 1/2 inch shank|Dovetail - 14° slope|https://www.axminstertools.com/axcaliber-dovetail-router-cutter-d-22-2-x-22-2mm-k-14-s-1-2-12-7mm-666019| 
 +|Table router bit - 1/2 inch shank|Chamfer Bit - 45° 47.5mm|https://www.axminstertools.com/axcaliber-chamfer-cutter-bearing-guided-d-47-6-x-20mm-s-1-2-12-7mm-666161| 
 +|Table router bit - 1/2 inch shank|Rabbeting bit with interchangeable bearings|https://www.axminstertools.com/axcaliber-rebate-cutter-set-d-34-92-x-12-7mm-s-1-2-12-7mm-666163| 
 +|Table router bit - 1/2 inch shank|Flush trim - 1 1/4 inch top bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutter-top-bearing-d-19-05-x-31-75mm-s-1-2-12-7mm-bearing-19mm-666090| 
 +|Table router bit - 1/2 inch shank|Flush trim - 2 inch bottom bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-bottom-bearing-d-12-7-x-50-8mm-s-1-2-12-7mm-666105| 
 +|Trim router bit - 1/4 inch shank|Roundover Bit - 3/8 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-31-75-x-15-88-r-9-53mm-s-1-4-6-35mm-666052| 
 +|Trim router bit - 1/4 inch shank|Roundover Bit - 1/4 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-25-4-x-11-11-r-6-35mm-s-1-4-6-35mm-666050| 
 +|Trim router bit - 1/4 inch shank|Roundover Bit  1/8 inch|https://www.axminstertools.com/axcaliber-ovolo-cutter-d-19-05-x-9-53-r-3-2mm-s-1-4-6-35mm-666047| 
 +|Trim router bit - 1/4 inch shank|Dovetail - 14° slope|https://www.axminstertools.com/axcaliber-dovetail-cutter-d-12-7-x-12-7mm-k-14-s-1-4-6-35mm-666015| 
 +|Trim router bit - 1/4 inch shank|Chamfer Bit - 45° 36.5mm|https://www.axminstertools.com/axcaliber-chamfer-cutter-bearing-guided-d-36-5-x-14-5mm-s-1-4-6-35mm-666159| 
 +|Trim router bit - 1/4 inch shank|Rabbeting bit with interchangeable bearings|https://www.axminstertools.com/axcaliber-rebate-cutter-set-d-34-92-x-12-7mm-s-1-2-12-7mm-666163| 
 +|Trim router bit - 1/4 inch shank|Flush trim - 1 inch top bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-top-bearing-d-15-88-x-25-4mm-s-1-4-6-35mm-bearing-16mm-666109| 
 +|Trim router bit - 1/4 inch shank|Flush trim - 1 inch bottom bearing|https://www.axminstertools.com/axcaliber-flush-trim-cutters-bottom-bearing-d-12-7-x-25-4mm-s-1-4-6-3mm-666101| 
 +|Trim router bit - 1/4 inch shank|Flush trim - 10mm bottom bearing|https://www.axminstertools.com/axcaliber-milling-cutter-with-top-bearing-952561| 
 +---
 |Band saw blades|Standard blade 1/2", length 93 1/4" / 2370mm 6 tpi. More info on the [[equipment:woodshop:bandsaw|bandsaw page]] | [[https://tuffsaws.co.uk/index.php?route=product/product&product_id=126|TuffSaws]]| |Band saw blades|Standard blade 1/2", length 93 1/4" / 2370mm 6 tpi. More info on the [[equipment:woodshop:bandsaw|bandsaw page]] | [[https://tuffsaws.co.uk/index.php?route=product/product&product_id=126|TuffSaws]]|
 |Sand paper rolls| Rolls of 60, 120, 180 and 240 grit|https://www.toolstation.com/aluminium-oxide-sanding-roll-115mm/p52521| |Sand paper rolls| Rolls of 60, 120, 180 and 240 grit|https://www.toolstation.com/aluminium-oxide-sanding-roll-115mm/p52521|
Line 71: Line 89:
 |Masking tape| |Masking tape|
 |Carpenters pencils| |Carpenters pencils|
 +|Compass|
 |Belt sander belts | 6" x 48" (150 x 1220mm) | Machine Mart https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-medium-pk5/| |Belt sander belts | 6" x 48" (150 x 1220mm) | Machine Mart https://www.machinemart.co.uk/p/sanding-belt-for-cs6-9bd-medium-pk5/|
 |Belt sander disks | 230mm diameter | Machine Mart https://www.machinemart.co.uk/p/sanding-disc-for-cs6-9bd-medium-pk5/| |Belt sander disks | 230mm diameter | Machine Mart https://www.machinemart.co.uk/p/sanding-disc-for-cs6-9bd-medium-pk5/|
Line 89: Line 108:
 |Hex & Torx keys|| |Hex & Torx keys||
 |Screwdrivers|| |Screwdrivers||
 +|Lathe Bits| Parting off, centre drills, indexable carbide bits|
 +
 +===COSH Cupboard===
 +^Item ^Notes ^Known good supplier^
 |WD-40|| |WD-40||
 |Grease|| |Grease||
 |Isopropyl Alcohol|| |Isopropyl Alcohol||
 |Lathe lubricants|| |Lathe lubricants||
-|Lathe Bits| Parting off, centre drills, indexable carbide bits|+|5 minute epoxy||https://www.amazon.co.uk/dp/B0DLG7H146?psc=1&smid=A7EIUXFMUPDNJ| 
 +|Super glue and activator||https://www.amazon.co.uk/Soudal-VISCOSITY-SUPERGLUE-ACTIVATOR-Bonding/dp/B075C6M4X7|
  
 ===Hot Works=== ===Hot Works===
 ^Item ^Notes ^Known good supplier^ ^Item ^Notes ^Known good supplier^
 |Flux Welding Wire|SIP MIG Gasless Flux Cord Welding Wire|https://www.toolstation.com/sip-mig-gasless-flux-cord-welding-wire/p13760| |Flux Welding Wire|SIP MIG Gasless Flux Cord Welding Wire|https://www.toolstation.com/sip-mig-gasless-flux-cord-welding-wire/p13760|
 +
 +===Craft Room===
 +^Item ^Notes ^Known good supplier^
 +|Dressmakers Clips||[[https://www.amazon.co.uk/dp/B0CKQPJV2Z/ref=twister_B0CKQPR9WZ?_encoding=UTF8&th=1|Dressmaker Clips]]|
 +|Heat Erasable Fabric Pens||[[https://www.amazon.co.uk/Colors-Erasable-Refills-Quilting-Dressmaking/dp/B0F2T918MF/ref=sr_1_4_sspa|Heat Erasable Fabric Pens]]|
 +|Hot Glue Sticks||[[https://www.amazon.co.uk/dp/B08B68PL34|Hot Glue Sticks]]|
 +|Tailors Pins||[[https://www.amazon.co.uk/dp/B0814CJ9PG|Tailors Pins (38mm)]]|
 +|Sewing Machine Needles||[[https://www.amazon.co.uk/Domestic-Universal-Suitable-Conventional-Household/dp/B001VB7I8Y|SCHMETZ]]|
 +|Hand Sewing Needles||[[https://www.amazon.co.uk/Piece-NEEDLE-COMPACT-Korbond-Assortment/dp/B007MCRX36|Korbond 30 Piece Needle Compact]]|
 +|Sew-all Thread||[[https://www.amazon.co.uk/Gutermann-Nostalgic-Sew-All-Thread-White/dp/B08C4W4ZZW|Gütermann creative Nostalgic Box containing 30 spools]]|
 +|Steel Scissors||[[https://www.amazon.co.uk/Rapesco-CS0205B1-Scissors-2-5-Blade/dp/B000I6NQR0|Rapesco CS0205B1 Essential 21cm Stainless]]|
 +|Fabric Scissors||[[https://www.amazon.co.uk/Fiskars-Scissors-RazorEdge-Softgrip-Stainless/dp/B00IJVQFUG|Fiskars RazorEdge Softgrip 23 cm]]|
 +|Seam Ripper||[[https://www.cottonpatch.co.uk/product/fiskars-seam-ripper-measuring-tape-set-10527|Fiskars Seam Ripper & Measuring Tape Set]]|
  • manual/consumables.1756804353
  • Last modified: 5 months ago
  • by dave