Differences

This shows you the differences between two versions of the page.

--- equipment:woodshop:woodturning_lathe:wood_lathe_induction_process [2024/05/05 15:09] – ralawrence
+++ equipment:woodshop:woodturning_lathe:wood_lathe_induction_process [2024/05/05 15:10] (current) – ralawrence
@@ Line 139: / Line 139: @@
         Turning Square to Round.
-        Rubbing the bevel. Bevel should start of vertical then made to cut by lifting back end of chisel up.
+        Rubbing the bevel. Bevel should start of vertical then made to cut by
+        lifting back end of chisel up.
         For large blanks cut of corners first.
 [[https://www.youtube.com/watch?v=QgRTSXdv0LI]]
-        Let them do a few passes with he Roughing Chisel then take over and turn it to round, or switch to a
+        Let them do a few passes with he Roughing Chisel then take over and turn it to round,
-        piece you have rounded earlier.
+        or switch to a piece you have rounded earlier.
 •       Using Spindle Gouge safely.