Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
equipment:woodshop:trendextractor [2024/12/18 20:59] – drewequipment:woodshop:trendextractor [2024/12/18 21:24] (current) – drew
Line 3: Line 3:
 {{:equipment:woodshop:t33a_main_240v.jpg?600|}} {{:equipment:woodshop:t33a_main_240v.jpg?600|}}
  
-WORK IN PROGRESS, please help populate+WORK IN PROGRESS, please help refine this page.
  
 <callout title="No-Induction Required" type="danger" icon="true"> This equipment requires no induction prior to use. </callout> <callout title="No-Induction Required" type="danger" icon="true"> This equipment requires no induction prior to use. </callout>
  
-<callout title="PPE Requirements" type="primary" icon="true"> This equipment requires the use of eye protection and hearing protection during use. Respiratory protection is recommended. </callout>+<callout title="PPE Requirements" type="primary" icon="true"> The extractor can be noisy so consider wearing hearing protection during use. If there is a lot of dust in the woodshop, respiratory protection is also recommended. </callout>
  
-====Specification====+==== Specification ====
 Product page: [[https://www.trend-uk.com/t33a-1200w-wet-dry-m-class-dust-extractor-240v-uk-ireland-only|T33A - 1200W Wet & Dry M-Class Dust Extractor 240V]] Product page: [[https://www.trend-uk.com/t33a-1200w-wet-dry-m-class-dust-extractor-240v-uk-ireland-only|T33A - 1200W Wet & Dry M-Class Dust Extractor 240V]]
  
Line 26: Line 26:
  
 ==== Introduction ==== ==== Introduction ====
-Product overview: +Product Overview: 
  
 {{youtube>v6BhUU8Upk4}} {{youtube>v6BhUU8Upk4}}
Line 34: Line 34:
 {{ :equipment:woodshop:trend_t33a_extractor_manual.pdf |Trend T33A User Manual.pdf}} {{ :equipment:woodshop:trend_t33a_extractor_manual.pdf |Trend T33A User Manual.pdf}}
  
 +==== Instructions For Use ====
  
-===== Instructions =====+== Check if the bag needs emptying or changing before and after use. ==
  
 +== Airborne wood dust is hazardous to health. Wood dust should always be vacuumed rather than swept with a brush to avoid creating airborne dust. ==
  
 +== Large chips, eg from planing or the wood lathe should be gathered up using the dustpan and brush and binned before vacuuming. ==
  
-=== No Wet Use === +== Do not use without a bag fitted. ==
-This machine is for use with wood dust in the +
  
-Do not use this extractor for liquids ... unless it is an emergency. Use the Charles vacuum from the CNC for   +== Do not use without a filter fitted. ==
-In the manual, it also talks about using the machine to clear liquids,+
  
-one has to replace the Hepa filter with a little gauze thing, which is bound to get lost.  +== No Wet Use. == 
 +This machine is for use with wood dust in the wood workshop, if it is used with liquids it will get gummed up inside.
  
 +Do not use this extractor for liquids ... unless it is an emergency. Instead, use the Charles vacuum from the CNC for liquids.
  
-=== Do not use without a bag === +If there is an emergency need to use this for liquids, it has that capability, please read page 10 of the manual for how to set it up. (clean out wood dust, remove bag, change filter) and ensure that you clean and dry the vacuum after use.
- - If the vacuum cleaner is used without the paper dust bag, the dust container must be emptied and cleaned after each use.  +
-I'm not sure is a good idea at Hackspace because doing so would, I assume, quickly screw the Hepa filter, which is even more expensive than the bags. +
  
 === Extraction velocity monitor & filter shaker button === === Extraction velocity monitor & filter shaker button ===
Line 56: Line 57:
  
 {{:equipment:woodshop:t33a_feat12_3.jpg?400|}} {{:equipment:woodshop:t33a_feat12_3.jpg?400|}}
- 
-If the monitor turns red only when you connect to a power tool, ensure that the extraction spouts of the tool and hose are not blocked. If clear, it is OK to use. Check the flow periodically by removing the extraction hose. 
  
 ==== Changing the Bag ==== ==== Changing the Bag ====
Line 78: Line 77:
   - The collection bag has a card-reinforced opening with a tab at the top.   - The collection bag has a card-reinforced opening with a tab at the top.
   - Handle the bag with care to avoid damage.   - Handle the bag with care to avoid damage.
-  - Insert the collection bag into the container with the opening towards the front of the vacuum cleaner (fig. 3 Below).+  - Insert the collection bag into the container with the opening towards the front of the vacuum cleaner (images below).
   - Pull the bag opening over the container deflector flange ensuring the collection bag opening passes over the ridge on the container deflector.   - Pull the bag opening over the container deflector flange ensuring the collection bag opening passes over the ridge on the container deflector.
   - Fold out the rest of the bag downwards into the container.   - Fold out the rest of the bag downwards into the container.
Line 85: Line 84:
 {{:equipment:woodshop:screenshot_2024-12-18_150454.png?400|}} {{:equipment:woodshop:screenshot_2024-12-18_150454.png?400|}}
  
-==== Power Take off ====+=== Power Take off ===
 Auto-Start 1500W Power Tool Take-Off automatically turns the extractor on and off with the connected power tool. Auto-Start 1500W Power Tool Take-Off automatically turns the extractor on and off with the connected power tool.
 +
 {{:equipment:woodshop:t33a_feat11_3.jpg?400|}} {{:equipment:woodshop:t33a_feat11_3.jpg?400|}}
  
-==== Changing the Hepa Filter ====+=== Changing the Hepa Filter ===
 {{:equipment:woodshop:t33a_feat8_3.jpg?400|}} {{:equipment:woodshop:t33a_feat8_3.jpg?400|}}
  
-=== Accessories ===+ 
  
  • equipment/woodshop/trendextractor.1734555596
  • Last modified: 4 months ago
  • by drew