Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
equipment:metalshop:proedgesharpener [2023/02/09 18:31] – drewequipment:metalshop:proedgesharpener [2024/11/19 21:42] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ===== ProEdge Sharpening System - Robert Sorby ===== ===== ProEdge Sharpening System - Robert Sorby =====
 {{:equipment:metalshop:pro_edge.jpg?nolink|}} {{:equipment:metalshop:pro_edge.jpg?nolink|}}
 +
 +<callout title="Induction Required" type="danger" icon="true"> This equipment requires an induction prior to use. For your own safety and to avoid damage to the equipment do not attempt to use it until you have been inducted. </callout>
 + 
 +<callout title="Laceration / Entanglement / Burn Hazard " type="warning" icon="true"> This equipment is hazardous to the user or those around them, take care during use.</callout>
 + 
 +<callout title="PPE Required" type="primary" icon="true"> This equipment requires the use of eye protection during use. </callout>
  
 ====Introduction==== ====Introduction====
Line 12: Line 18:
 It is vital that eye protection and a form of dust mask are ALWAYS worn and a dust extraction system is in operation. Ensure loose clothing and long hair are kept well away from any moving parts. Maintain a clean working environment when operating grinding and sharpening systems as sparks from this type of equipment are extremely hot and can cause a fire if they get onto wood dust. Always switch off and disconnect from the wall socket mains electric supply before changing belts or jigs or making any adjustments to the system.   It is vital that eye protection and a form of dust mask are ALWAYS worn and a dust extraction system is in operation. Ensure loose clothing and long hair are kept well away from any moving parts. Maintain a clean working environment when operating grinding and sharpening systems as sparks from this type of equipment are extremely hot and can cause a fire if they get onto wood dust. Always switch off and disconnect from the wall socket mains electric supply before changing belts or jigs or making any adjustments to the system.  
  
-As per Hackspace code of conduct, always clean up after use – return all belts and jigs to the designated spot on the shadow board and sweep up any metal filings and put them in the appropriate bin. If there is any damage the machine or missing parts/belts/jigs, please make it known to other members via the google group.+As per Hackspace code of conduct, always clean up after use – return all belts and jigs to the designated spot on the shadow board and sweep up any metal filings and put them in the appropriate bin. If there is any damage the machine or missing parts/belts/jigs, please make it known to other members via the Discourse Forum.
  
 ====Parts of the unit==== ====Parts of the unit====
Line 72: Line 78:
 Please refer to the angle setter information guide on the front of the system for more recommended bevel angles. Please refer to the angle setter information guide on the front of the system for more recommended bevel angles.
  
-====Induction Test====+====Induction test====
 Please click the link below to complete the induction test\\ Please click the link below to complete the induction test\\
 [[https://forms.gle/FFtG9fgRpu9WkbZ57]]  [[https://forms.gle/FFtG9fgRpu9WkbZ57]] 
  • equipment/metalshop/proedgesharpener.1675967514
  • Last modified: 5 months ago
  • (external edit)