Differences

This shows you the differences between two versions of the page.

--- equipment:metalshop:metallathe:home [2024/05/05 14:45] – ralawrence
+++ equipment:metalshop:metallathe:home [2024/11/19 21:42] (current) – external edit 127.0.0.1
@@ Line 54: / Line 54: @@
 ===== Accessories =====
-  *5" Pratt Burnerd 3 jaw chuck\\
+[[equipment:metalshop:metallathe:accessories|]]
-  *5" 4 jaw independent chuck\\
-  *Drive plate for turning between centres.\\
-  *Live centre for tailstock - a bit blunt and battered.\\
-  *Dead centre - with carbide tip.\\
-  *Half dead centre.\\
-  *Keyless Chuck for Tailstock.\\
-  *Parting off tools. \\
-  *Some Carbide insert cutting tools. \\
-  *Lots of HSS for making cutting tools. \\
-  *[[equipment:metalshop:metallathe:lathedro|2 Axis Mitutoyo DRO Digital XY readout]]\\
-  *An imperial dial indicator and stand.\\
-  *Cheapo digital callipers.\\
-  *Large and Small Precision Levels .\\
-  *Travelling steady.\\
-  *Fixed steady.\\
-  *[[equipment:metalshop:metallathe:tdi|Thread Dial Indicator.]]\\
-  *Change gears in the bottom draw for a wider range of screw cutting options.\\
-  *Morse taper reducing sleeves.\\
-  *Some reamers\\
 ===== Suitable Materials =====
@@ Line 85: / Line 66: @@
 If you have any doubts as to whether a material is suitable, or whether it needs HSS or Carbide Tooling and coolant, please ask on the forum.
+===== How to guides =====
+How to use the Tap Follower
+How to use the Die Holder
+[[equipment:metalshop:metallathe:tdi|How to fit the Thread Cutting Gauge.]]\\
+[[equipment:metalshop:metallathe:howto:cutthreadsl2r|How to cut Threads using the Left to Right Method.]]
 ===== Maintenance =====
 Daily maintenance is to be carried out every time you use the lathe.
+A some documents and links on how to do things on the lathe.
 [[equipment:metalshop:metallathe:metallathemaintainance|]]