1 Ton Arbor Press - Clarke AP1000

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== 1 Ton Arbor Press - Clarke AP1000 =====

{{:equipment:metalshop:pxl_20230903_195232645.jpg?direct&400|}}
 
<callout title="Crush" type="warning" icon="true"> This equipment can be hazardous to the user, take care during use.</callout>
 
<callout title="PPE Required" type="primary" icon="true"> This equipment may require the use of eye protection or gloves depending on what you are pressing. </callout>

Heavy-duty press designed for garage / workshop use. Ideal for repetitive manufacturing processes, this press includes a rotating table with four differing sizes of cut-out.
Capacity 1 Ton
Throat depth 117mm
Throat height 112mm
Ram size 17mm x 17mm
Weight 9.25kg
Overall dimensions (WDH) 173mm x 250mm x 350mm

===Risk Assessment===
  * Low risk.

=== Safety ===
  * Keep fingers out of the way.

=== Maintenance and Clean up ===
  * Brush or vacuum the machine to remove dust. After use, put it back in the corner behind the drill press.
  * A spot of oil on the moving parts occasionally would be good.