Audio Amplifier - Cambridge Audio A1
The audio mixer located in Bristol Communal Modular's area of the space is available for use by everyone to play music in the space.
Basic Specification
Power output: 25 watts per channel (8 Ohms)
Frequency Response: 10Hz to 60kHz
Speaker Load impedance: 4 Ohms to 8 Ohms
Operation
You will need to plug any device into the Audio Mixer located on the shelf beneath the amplifier
Volume is controlled with the largest knob in the center of the panel.
Bass and Treble can be adjusted using the smaller knobs on the left.
Balance between left and right speakers is adjusted with the small knob directly to the right of the volume.
The source selection knob is further to the right, for our purposes, this is always left on AUX/PHONO
The push button furthest to the right is something to do with Tape input.
Manual