Differences

This shows you the differences between two versions of the page.

--- equipment:woodshop:trendextractor [2024/12/18 14:38] – drew
+++ equipment:woodshop:trendextractor [2024/12/18 21:24] (current) – drew
@@ Line 1: / Line 1: @@
 ====== Portable Dust Extractor - Trend T33A ======
-WORK IN PROGRESS, please help populate
+{{:equipment:woodshop:t33a_main_240v.jpg?600|}}
+WORK IN PROGRESS, please help refine this page.
 <callout title="No-Induction Required" type="danger" icon="true"> This equipment requires no induction prior to use. </callout>
-<callout title="PPE Requirements" type="primary" icon="true"> This equipment requires the use of eye protection and hearing protection during use. Respiratory protection is recommended. </callout>
+<callout title="PPE Requirements" type="primary" icon="true"> The extractor can be noisy so consider wearing hearing protection during use. If there is a lot of dust in the woodshop, respiratory protection is also recommended. </callout>
-====Specification====
+==== Specification ====
 Product page: [[https://www.trend-uk.com/t33a-1200w-wet-dry-m-class-dust-extractor-240v-uk-ireland-only|T33A - 1200W Wet & Dry M-Class Dust Extractor 240V]]
@@ Line 22: / Line 24: @@
   * 5m Extraction Hose & 5m Power Cable.
   * Includes combination floor tool, crevice tool, round brush and power tool adapter.
 ==== Introduction ====
+Product Overview:
+{{youtube>v6BhUU8Upk4}}
+Full Instruction Manual:
 {{ :equipment:woodshop:trend_t33a_extractor_manual.pdf |Trend T33A User Manual.pdf}}
-{{youtube>v6BhUU8Upk4}}
+==== Instructions For Use ====
+== Check if the bag needs emptying or changing before and after use. ==
+== Airborne wood dust is hazardous to health. Wood dust should always be vacuumed rather than swept with a brush to avoid creating airborne dust. ==
+== Large chips, eg from planing or the wood lathe should be gathered up using the dustpan and brush and binned before vacuuming. ==
+== Do not use without a bag fitted. ==
+== Do not use without a filter fitted. ==
+== No Wet Use. ==
+This machine is for use with wood dust in the wood workshop, if it is used with liquids it will get gummed up inside.
+Do not use this extractor for liquids ... unless it is an emergency. Instead, use the Charles vacuum from the CNC for liquids.
-=== Risks ===
+If there is an emergency need to use this for liquids, it has that capability, please read page 10 of the manual for how to set it up. (clean out wood dust, remove bag, change filter) and ensure that you clean and dry the vacuum after use.
-===== Basic Instructions =====
+=== Extraction velocity monitor & filter shaker button ===
+If the extraction velocity monitor is red, press and hold the filter shaker button for 3 seconds. (device/extraction must be on) the filter will continue the shaker function for a further 5 seconds after release.
+{{:equipment:woodshop:t33a_feat12_3.jpg?400|}}
-=== Extraction and Dust Control ===
+==== Changing the Bag ====
-Always use extraction
+=== Removing the Collection Bag ===
-=== Wet Use ===
+The collection bag must be replaced when the extraction velocity monitor goes to red and stays on red.
-This machine is for use with wood dust in the
+  - Unlock the container catches and remove the lid.
+  - To remove bag undo the container hose pull bag off the container deflector flange.
+  - Close the bag by flipping the tab over (fig 4 below).
+  - Dispose of the filter in a suitable container according to the applicable laws.
+  - It is good practice to change the bag regularly to guarantee optimal cooling of the motor.
-=== Maintenance ===
+{{:equipment:woodshop:screenshot_2024-12-18_150420.png?600|}}
+=== Inserting a new Collection Bag ===
-=== Accessories ===
+  - Spare collection bags are kept in the cupboard in the hall. If we are running low, please ask on the consumables forum thread for more to be ordered.
+  - The collection bag has a card-reinforced opening with a tab at the top.
+  - Handle the bag with care to avoid damage.
+  - Insert the collection bag into the container with the opening towards the front of the vacuum cleaner (images below).
+  - Pull the bag opening over the container deflector flange ensuring the collection bag opening passes over the ridge on the container deflector.
+  - Fold out the rest of the bag downwards into the container.
+{{:equipment:woodshop:t33a_feat9_3.jpg?600|}}
+{{:equipment:woodshop:screenshot_2024-12-18_150454.png?400|}}
+=== Power Take off ===
+Auto-Start 1500W Power Tool Take-Off automatically turns the extractor on and off with the connected power tool.
+{{:equipment:woodshop:t33a_feat11_3.jpg?400|}}
+=== Changing the Hepa Filter ===
+{{:equipment:woodshop:t33a_feat8_3.jpg?400|}}