Differences

This shows you the differences between two versions of the page.

--- equipment:woodshop:trendextractor [2024/12/18 10:24] – drew
+++ equipment:woodshop:trendextractor [2024/12/18 21:24] (current) – drew
@@ Line 1: / Line 1: @@
-====== Trend T33A - Portable Dust Extractor ======
+====== Portable Dust Extractor - Trend T33A ======
-WORK IN PROGRESS, please help populate
+{{:equipment:woodshop:t33a_main_240v.jpg?600|}}
+WORK IN PROGRESS, please help refine this page.
 <callout title="No-Induction Required" type="danger" icon="true"> This equipment requires no induction prior to use. </callout>
-<callout title="PPE Required" type="primary" icon="true"> This equipment requires the use of eye protection and hearing protection during use. Respiratory protection is recommended. </callout>
+<callout title="PPE Requirements" type="primary" icon="true"> The extractor can be noisy so consider wearing hearing protection during use. If there is a lot of dust in the woodshop, respiratory protection is also recommended. </callout>
+==== Specification ====
-====Specification====
 Product page: [[https://www.trend-uk.com/t33a-1200w-wet-dry-m-class-dust-extractor-240v-uk-ireland-only|T33A - 1200W Wet & Dry M-Class Dust Extractor 240V]]
-The T33A is Trade-rated wet & dry M-Class dust extractor with power take-off for workshop, site and trade use.
+The T33A is a trade-rated wet & dry M-Class dust extractor with power take-off for workshop, site and trade use.
   * M-Class Certification guarantees 99.9% filtration efficiency for fine dust applications and use with all wood types.
@@ Line 23: / Line 24: @@
   * 5m Extraction Hose & 5m Power Cable.
   * Includes combination floor tool, crevice tool, round brush and power tool adapter.
 ==== Introduction ====
+Product Overview:
 {{youtube>v6BhUU8Upk4}}
-These 3 links give an overview of the capabilities and basic use of a router and table.
+Full Instruction Manual:
+{{ :equipment:woodshop:trend_t33a_extractor_manual.pdf |Trend T33A User Manual.pdf}}
+==== Instructions For Use ====
-[[http://www.rockler.com/how-to/router-table-basics-quick-tour-router-table-techniques|Router Table Basics - A Quick Tour of Router Table Techniques]]
+== Check if the bag needs emptying or changing before and after use. ==
+== Airborne wood dust is hazardous to health. Wood dust should always be vacuumed rather than swept with a brush to avoid creating airborne dust. ==
-=== Risks ===
+== Large chips, eg from planing or the wood lathe should be gathered up using the dustpan and brush and binned before vacuuming. ==
+== Do not use without a bag fitted. ==
+== Do not use without a filter fitted. ==
-===== Basic Instructions =====
+== No Wet Use. ==
+This machine is for use with wood dust in the wood workshop, if it is used with liquids it will get gummed up inside.
-==== Set up ====
+Do not use this extractor for liquids ... unless it is an emergency. Instead, use the Charles vacuum from the CNC for liquids.
-=== Extraction and Dust Control ===
+If there is an emergency need to use this for liquids, it has that capability, please read page 10 of the manual for how to set it up. (clean out wood dust, remove bag, change filter) and ensure that you clean and dry the vacuum after use.
-Always use extraction
+=== Extraction velocity monitor & filter shaker button ===
+If the extraction velocity monitor is red, press and hold the filter shaker button for 3 seconds. (device/extraction must be on) the filter will continue the shaker function for a further 5 seconds after release.
+{{:equipment:woodshop:t33a_feat12_3.jpg?400|}}
+==== Changing the Bag ====
+=== Removing the Collection Bag ===
-=== Clean up ===
+The collection bag must be replaced when the extraction velocity monitor goes to red and stays on red.
-Photo
-Leave the machine set up ready for profile cutting
+  - Unlock the container catches and remove the lid.
-With the router bit set **below** the height of the table. SAFETY
+  - To remove bag undo the container hose pull bag off the container deflector flange.
-The machine locked out.
+  - Close the bag by flipping the tab over (fig 4 below).
-Clean and dust free.
+  - Dispose of the filter in a suitable container according to the applicable laws.
-With the fence and micro adjusters fitted.
+  - It is good practice to change the bag regularly to guarantee optimal cooling of the motor.
-The feather boards fitted to the top of the table.
-=== Maintenance ===
+{{:equipment:woodshop:screenshot_2024-12-18_150420.png?600|}}
+=== Inserting a new Collection Bag ===
-=== Accessories ===
+  - Spare collection bags are kept in the cupboard in the hall. If we are running low, please ask on the consumables forum thread for more to be ordered.
+  - The collection bag has a card-reinforced opening with a tab at the top.
+  - Handle the bag with care to avoid damage.
+  - Insert the collection bag into the container with the opening towards the front of the vacuum cleaner (images below).
+  - Pull the bag opening over the container deflector flange ensuring the collection bag opening passes over the ridge on the container deflector.
+  - Fold out the rest of the bag downwards into the container.
+{{:equipment:woodshop:t33a_feat9_3.jpg?600|}}
+{{:equipment:woodshop:screenshot_2024-12-18_150454.png?400|}}
+=== Power Take off ===
+Auto-Start 1500W Power Tool Take-Off automatically turns the extractor on and off with the connected power tool.
+{{:equipment:woodshop:t33a_feat11_3.jpg?400|}}
+=== Changing the Hepa Filter ===
+{{:equipment:woodshop:t33a_feat8_3.jpg?400|}}