Differences

This shows you the differences between two versions of the page.

--- equipment:woodshop:tablesaw-w650p [2026/10/05 23:09] – matt
+++ equipment:woodshop:tablesaw-w650p [2026/10/06 13:00] (current) – sammyc
@@ Line 17: / Line 17: @@
   * **THE TABLE SAW IS NOT A GENERAL PURPOSE SAW!** It is designed to make specific types of cuts, and should only be used in that way. Check if we have a more suitable tool before using the table saw. **The table saw should always be your last option for making a cut.**
-  * **Wood dust is hazardous!** You must always connect the table saw to the mobile extractor, and empty the extractor bin when it's full.
+  * **Wood dust is hazardous!** You must always ensure the dust extraction blast gate is open and the main dust extractor switched on! Empty the extractor bin when it's full.
   * **The table saw is loud!** You must wear ear protection, and offer it to those around you before using the saw.
@@ Line 43: / Line 43: @@
 ===== Parts of the Table Saw =====
-{{ equipment:woodshop:table_saw:table-saw-w650p-diagram.png }}
+{{:equipment:woodshop:table-saw-w650p-diagram.png?600|}}
 ===== Working Safely =====
@@ Line 63: / Line 62: @@
   * Inspect the machine for obvious defects or damage.
-  * Check the riving knife and blade guard are present.
+  * Check the riving knife and blade guard (b) are present.
   * Ensure your working area is clear of trip-hazards and obstacles.
   * Ensure the outfeed area is clear of obstructions.
@@ Line 70: / Line 69: @@
     - Release the locking handle (h)
     - Adjust the blade angle with the lever on the right hand side of the machine (k)
-    - Adjust the blade height with the lever on the front of the machine. The blade gullets should be just above the surface of your material [[https://youtu.be/U-bTxAeh9DA?t=6 | See this video ]]
+    - Adjust the blade height with the lever on the front of the machine(i). The blade gullets should be just above the surface of your material [[https://youtu.be/U-bTxAeh9DA?t=6 | See this video ]]
     - Engage the locking handle (h)
   * Check that the dust collector is not full.
-  * Switch on the dust collector.
   * Open the blast gate for the table saw and close the blast gates for any machines not currently in use.
+  * Switch on the dust collector.
 ===== Rip Cutting (Cutting along the fence) =====
-Rip cutting must always be done with the aid of the rip fence.
+Rip cutting must always be done with the aid of the rip fence (d).
 **NEVER attempt to rip cut freehand**
@@ Line 87: / Line 86: @@
   * Lock the fence in the correct position for your cut, as follows:
     - Loosen both the Main locking knob (p) and Micro adjustment knob (q)
-    - Move the fence into roughly the correct position
+    - Move the rip fence (d) into roughly the correct position
     - Tighten the Micro adjustment knob (q)
     - Turn the Micro adjustment screw to position the fence exactly ( r )
@@ Line 93: / Line 92: @@
 {{ equipment:woodshop:table_saw:table-saw-w650p-fence-adjust.png }}
-  * When cutting load boards or large sheets, use roller stands or an outfeed table to ensure they cannot tip or drop as the cut finishes.
+  * When cutting long boards or large sheets, use roller stands or an outfeed table to ensure they cannot tip or drop as the cut finishes.
 === To make a Rip Cut ===
   * Switch on the saw
-  * Hold the workpiece firmly against the rip fence and flat to the sliding table.
+  * Hold the workpiece firmly against the rip fence (d) and flat to the bed (a).
   * **Wherever possible, use push sticks or push blocks instead of your hands to hold your material. Many gruesome table saw accidents would have been prevented this way.**
   * Feed your material slowly through the saw.
@@ Line 109: / Line 108: @@
 ===== Cross Cutting (using the sliding table) =====
-With the aid of the sliding table and angle fence, our table saw can be used for cross-cutting.
+With the aid of the sliding table (e) and angle fence (f), our table saw can be used for cross-cutting.
 When cross cutting, your material must be firmly held to the angled fence on the sliding table, and the the sliding table is then used to guide the material through the saw blade.
@@ Line 115: / Line 114: @@
 **NEVER attempt to cross cut freehand or with the aid of the rip fence**
-After crosscutting, the saw should be set back up for rip cutting.
+After cross cutting, the saw should be set back up for rip cutting.
 === To set up for a cross cut ===
   * Move the rip fence well clear of your work, or remove it entirely from the table.
-  * Slot the angle fence into the sliding table.
+  * Slot the angle fence (f) into the sliding table (e).
   * Set it to the angle you want to cut (you can check the angle against the riving knife).
-  * Lock the angle fence into position.
+  * Lock the angle fence (f) into position.
+  * Check that the angle fence will not come into contact with the blade during the cut
 === To make a cross cut ===
   * Switch on the saw
-  * Hold the workpiece firmly against the angle fence and flat to the sliding table.
+  * Hold the workpiece firmly against the angle fence (f) and flat to the sliding table (e).
-  * Slowly and smoothly push the sliding table forwards, guiding your workpiece across the blade.
+  * Slowly and smoothly push the sliding table (e) forwards, guiding your workpiece across the blade.
   * **Do not stop, twist or pull back part way through the cut.**
-Here is a good example of the correct setup for a cross cut with the board against the sliding table fence:
+Here is a good example of the correct setup for a cross cut with the board against the angle fence:
 {{ equipment:woodshop:table_saw:table-saw-w650-cross-hands_1.jpeg?600 }}