Differences

This shows you the differences between two versions of the page.

--- equipment:hotworks:proedgesharpener [2026/03/17 12:54] – kit
+++ equipment:hotworks:proedgesharpener [2026/04/18 23:31] (current) – kit
@@ Line 27: / Line 27: @@
 Due to proximity to the grinder and welder only this cannot be used when they are in use and vice versa, please be considerate of other members when using equipment in the hot works area for long periods of time.
-As per Hackspace code of conduct, always clean up after use – return all belts and jigs to the designated spot on the shadow board and sweep up any metal filings and put them in the appropriate bin. If there is any damage the machine or missing parts/belts/jigs, please make it known to other members via the Discourse Forum.
+As per Hackspace code of conduct, always clean up after use – return all belts and jigs to the designated spot on the shadow board and sweep up any metal filings and put them in the appropriate bin. If there is any damage the machine or missing parts/belts/jigs, please leave a note on the machine, make it known to other members via the Discourse Forum and let committee know.
 Please remember to log out from the RFID box - or put the plug back in the lock box before you leave.
@@ Line 46: / Line 46: @@
 The Robert Sorby ProEdge is a sharpener for chisels, drill bits, planes, knives and garden tools. \\
 It is not to be used to sand wood. Please use our bigger belt sander for this.
+=== Location ===
+This will be kept in the hot works area bolted to the grinding bench. Due to the potential for sparks, and heavy usage that would need the roller shutter to be opened.
 ==== Manual ====
@@ Line 69: / Line 72: @@
 See the catalogue for belt codes - [[https://ebookhq.co.uk/robert-sorby/catalogue-2017/html5/index.html?page=51]].
+==== How to Use ====
+ Please read through the manual, below is some guidance for this in the space.
 ====Tilting the Sharpening belt assembly====
@@ Line 107: / Line 113: @@
 {{:equipment:metalshop:screen_shot_2021-09-23_at_5.19.49_pm.png?nolink&600|}}\\
 Please refer to the angle setter information guide on the front of the system for more recommended bevel angles.
+==== Clean up ====
+Please clear away the dust and debris after use, sweep up all the metal filing and put them in the appropriate metal waste bin. Return all belts and jigs to their designated spot on the shadow board. If there is any damage the machine or missing parts/belts/jigs, please make it known to other members via the Discourse Forum.
+==== Consumables ====
+  * Sorby sharpening belts	60,120 and 240 grit Aluminium - A6 and A16 Trizact
+==== Known Issues ====
+No reported issues at this time, but please let committee know or add them here with the date and solution (if there is one).
 ====Induction test====
 Please click the link below to complete the induction test\\
 [[https://forms.gle/FFtG9fgRpu9WkbZ57]]