Differences

This shows you the differences between two versions of the page.

--- equipment:hotworks:proedgesharpener [2025/12/20 15:35] – ↷ Page moved from equipment:metalshop:proedgesharpener to equipment:hotworks:proedgesharpener kit
+++ equipment:hotworks:proedgesharpener [2026/04/18 23:31] (current) – kit
@@ Line 1: / Line 1: @@
 ===== ProEdge Sharpening System - Robert Sorby =====
-{{:equipment:metalshop:pro_edge.jpg?nolink|}}
+{{ :equipment:hotworks:sorby_hotworks2.jpg?400 |}}
 <callout title="Induction Required" type="danger" icon="true"> This equipment requires an induction prior to use. For your own safety and to avoid damage to the equipment do not attempt to use it until you have been inducted. </callout>
@@ Line 6: / Line 8: @@
 <callout title="Laceration / Entanglement / Burn Hazard " type="warning" icon="true"> This equipment is hazardous to the user or those around them, take care during use.</callout>
-<callout title="PPE Required" type="primary" icon="true"> This equipment requires the use of eye protection during use. </callout>
+<callout title="PPE Required" type="primary" icon="true"> This equipment requires the use of eye protection during use and dust masks. </callout>
+===== Risks =====
+==== Risk Assessment ====
+- To Be Added
+==== Safety and Conduct ====
+  * It is vital that eye protection and a form of dust mask are ALWAYS worn and a dust extraction system is in operation or the roller shutter door is opened to increase air flow.
+  * Ensure loose clothing and long hair are kept well away from any moving parts.
+  * Maintain a clean working environment when operating grinding and sharpening systems as sparks from this type of equipment are extremely hot and can cause a fire if they get onto wood dust.
+  * Always switch off and disconnect from the wall socket mains electric supply before changing belts or jigs or making any adjustments to the system.
+  * There is a risk of tools, debris or the workpiece being ejected from the machine, if the bench isn't clear, of tools or the workpeice are not held or fixed in place correctly. Please tidy area before use and follow the directions of use in the manual and below.
+  * There is a risk of the belt braking during use please check the belt for wear and tear to minimise this risk.
+  * Do not touch the belt with your hands when it is running and make sure the side guard is in place before turning it on.
+  * Make sure the sharpener is securely fixed to the bench to prevent it toppling during use.
+Due to proximity to the grinder and welder only this cannot be used when they are in use and vice versa, please be considerate of other members when using equipment in the hot works area for long periods of time.
+As per Hackspace code of conduct, always clean up after use – return all belts and jigs to the designated spot on the shadow board and sweep up any metal filings and put them in the appropriate bin. If there is any damage the machine or missing parts/belts/jigs, please leave a note on the machine, make it known to other members via the Discourse Forum and let committee know.
+Please remember to log out from the RFID box - or put the plug back in the lock box before you leave.
+==== PPE ====
+  * Dust mask
+  * Safety Glasses
+===== Induction =====
+Due to the risks involved an induction is required to use this machine; You will find the link at the bottom of this page. Once you have passed the online induction, you will be given the code to unlock the power plug.
+This will be moving to the online induction system on the membership portal PC in the laser cutting room and the RFID - Bleepy box system- linked to your fob/membership card.
+Once you are inducted only you will be able to use this machine. Do not unlock the machince for others to use. This machine cannot be used by others non-members or members who have not done the online induction, even if you are supervising them.
+===== Introduction =====
-====Introduction====
 The Robert Sorby ProEdge is a sharpener for chisels, drill bits, planes, knives and garden tools. \\
 It is not to be used to sand wood. Please use our bigger belt sander for this.
-====Induction====
+=== Location ===
-An induction is required to use this machine; You will find the link at the bottom of this page. Once you have passed the online induction, you will be given the code to unlock the power plug.
+This will be kept in the hot works area bolted to the grinding bench. Due to the potential for sparks, and heavy usage that would need the roller shutter to be opened.
-====Safety and Conduct====
+==== Manual ====
-It is vital that eye protection and a form of dust mask are ALWAYS worn and a dust extraction system is in operation. Ensure loose clothing and long hair are kept well away from any moving parts. Maintain a clean working environment when operating grinding and sharpening systems as sparks from this type of equipment are extremely hot and can cause a fire if they get onto wood dust. Always switch off and disconnect from the wall socket mains electric supply before changing belts or jigs or making any adjustments to the system.
+{{ :equipment:hotworks:2024-proedge-instructions-web.pdf |}}
-As per Hackspace code of conduct, always clean up after use – return all belts and jigs to the designated spot on the shadow board and sweep up any metal filings and put them in the appropriate bin. If there is any damage the machine or missing parts/belts/jigs, please make it known to other members via the Discourse Forum.
 ====Parts of the unit====
@@ Line 39: / Line 72: @@
 See the catalogue for belt codes - [[https://ebookhq.co.uk/robert-sorby/catalogue-2017/html5/index.html?page=51]].
+==== How to Use ====
+ Please read through the manual, below is some guidance for this in the space.
 ====Tilting the Sharpening belt assembly====
@@ Line 77: / Line 113: @@
 {{:equipment:metalshop:screen_shot_2021-09-23_at_5.19.49_pm.png?nolink&600|}}\\
 Please refer to the angle setter information guide on the front of the system for more recommended bevel angles.
+==== Clean up ====
+Please clear away the dust and debris after use, sweep up all the metal filing and put them in the appropriate metal waste bin. Return all belts and jigs to their designated spot on the shadow board. If there is any damage the machine or missing parts/belts/jigs, please make it known to other members via the Discourse Forum.
+==== Consumables ====
+  * Sorby sharpening belts	60,120 and 240 grit Aluminium - A6 and A16 Trizact
+==== Known Issues ====
+No reported issues at this time, but please let committee know or add them here with the date and solution (if there is one).
 ====Induction test====
 Please click the link below to complete the induction test\\
 [[https://forms.gle/FFtG9fgRpu9WkbZ57]]