Differences

This shows you the differences between two versions of the page.

--- equipment:electronics:engraver [2025/12/20 15:48] – removed - external edit (Unknown date) 127.0.0.1
+++ equipment:electronics:engraver [2026/05/13 12:07] (current) – Uploaded copy of installer ZIP rather than relying on link to the Internet Archive. whitecf
@@ Line 1: / Line 1: @@
+======Engraver / Impact Printer - Roland MPX-90======
+===== Location =====
+Shelf on the back wall by the textiles bench.
+{{:equipment:mainroom:back_wall_equipment_shelf.jpg?600|}}
+===== Instructions =====
+It is very easy to use, in summary:
+Turn it on.
+Run Metaza Studio.
+Put a piece of material to engrave in the machine in the centre. Clamp firmly. Polished aluminium works well but you can use any metal or plastic.
+Select material shape in Metaza Studio and set the size to match your actual material.
+Create your design, keep the material shape in the centre.
+Then click Print. Select “Properties/Image Correction” and set the material type and resolution. Click OK to start.
+The engraver head automatically lowers down to find the surface of the material. The head tracks the surface so you can print on curved surfaces within certain limits.
+There are many other ways to use the machine, read the {{:equipment:mpx-90_use_en_r5.pdf|User Manual}}.
+=== Software ===
+{{:equipment:metazastudio.zip|}}
+=== Useful links ===
+Useful video: https://www.youtube.com/watch?v=_hLbtiwQC4M