Differences

This shows you the differences between two versions of the page.

--- equipment:electronics:3dprinters:prusacoreone [2025/10/04 10:38] – tamsin
+++ equipment:electronics:3dprinters:prusacoreone [2025/12/20 15:44] (current) – ↷ Links adapted because of a move operation kit
@@ Line 1: / Line 1: @@
 ====== Prusa Core One ======
-{{ :equipment:cnc:core_one.jpg?nolink&600 |}}
+{{ equipment:laser:core_one.jpg?nolink&600 |}}
@@ Line 19: / Line 19: @@
 ===== Induction =====
-Inductions for the 3D printers are now available on the member portal (right-hand PC by the electronics bench). Tap your card/keyfob on the reader, select “Manage machine inductions”, and take the 3D printer quiz. You will then have access on the RFID lockout box, you just need to tap your card/fob and it will switch on.
+Inductions for the 3D printers are now available on the member portal (PC near the door in the laser cutter room). Tap your card/keyfob on the reader, select “Manage machine inductions”, and take the 3D printer quiz. You will then have access on the RFID lockout box, you just need to tap your card/fob and it will switch on.
 **Print file format:** bgcode or gcode - bgcode will load and start printing faster
@@ Line 88: / Line 88: @@
   - Once the extruder stops unloading the filament, remove it by hand from the PTFE tube. The filament needs to be wound up on the spool and secured carefully so that it does not tangle up.
   - Make sure to secure the unloaded filament when you wind it up back onto the spool. If the end of the filament slips out, the spool may become tangled.
-{{ :equipment:cnc:unloading_filament.png?400 |}}
+{{ equipment:laser:unloading_filament.png?400 |}}
 ===== Accessories =====