Differences

This shows you the differences between two versions of the page.

--- equipment:craft:pfaff-passport-2 [2025/11/18 16:17] – kit
+++ equipment:craft:pfaff-passport-2 [2025/11/18 17:37] (current) – kit
@@ Line 68: / Line 68: @@
 === Free arm ===
-{{:equipment:craft:pfaff-freearm.jpg?nolink&200|}}
+{{:equipment:craft:pfaff-freearm.jpg?nolink&200 |}}
   * For use with sleeves and narrow projects.
-  * Just slide off the accessory tray to use.
+  * Slide off the accessory tray
+  * Clear work area
+  * Arm is ready to use
+----
 === Thread cutter ===
-To use the thread cutter, pull thread from back to front as in image below:
+{{ :equipment:craft:pfaff-threadcutter.png?nolink&200 |}}
-{{:equipment:craft:pfaff-threadcutter.png?nolink&400 |}}
 (Image taken from manual, page 11).
+To use the thread cutter, pull thread from back to front as in image below:
+----
 === Spool pins ===
-{{ :equipment:craft:pfaff_horizontal_spool.png?nolink&400 |}}
+{{ :equipment:craft:pfaff_horizontal_spool.png?nolink&200 |}}
 The machine has two spool pins, a main spool pin and an auxiliary spool pin. These are designed for many types of thread. The main spool pin is adjustable and can be used in both horizontal position ( the thread reels off the spool) and a vertical position ( the thread spool rotates. The horizontal position can be used for most sewing and embroidery thread and the vertical position can be used for many speciality thread.
@@ Line 89: / Line 98: @@
 == Vertical Position ==
-{{ :equipment:craft:pfaff_vertical_spool.png?nolink&400 |}}
+{{ :equipment:craft:pfaff_vertical_spool.png?nolink&200 |}}
 Turn the spool pin to the vertical position. Slide on the large spool cap and place a felt pad under the spool to prevent the thread reeling off too fast.
@@ Line 100: / Line 109: @@
 We also have a separte spool holder for the large spools available in Hackspace. This primarily works by the thread reeling off the spool, but there is little tension correction prior to the machine so there amy be issues with tension is using this.
-{{:equipment:craft:largespool_holder.jpg?nolink&200 |}}
+{{ :equipment:craft:largespool_holder.jpg?nolink&200 |}}
+----
 === Threading the machine ===
+For single needle theading please follow the images below or refer to the manual for more information. For dual needle trheading please refer to the manual.
+{{ :equipment:craft:pfaff-threading1.png?nolink&400 |}}
+{{ :equipment:craft:pfaff-threading2.png?nolink&400 |}}
+{{ :equipment:craft:pfaff-threading3.png?nolink&400 |}}
+----
+=== Bobbins ===
+These machines can do bobbin winding and use a horizontal bobbin holder beneath the sewing needle for more information on how to wind and insert the bobbin please refer to the manual.
+----
+=== IDT (TM) - Integrated Dual Feed ===
+This is a system for sewing fabrics precisely and is a trade marked solution from Pfaff.
+For some stitches and fabrics ( light silk or rayon) it is important to feed the top fabric and bottom fabric at the same time. This also helps with keeping patterns together and quilting.
+You can engage and disengage the IDT system depending on your need.
+It only works whether presser feet with the center back cut out (see page 15 in the manual for more information.)
+To engage the IDT system raise the presser foot and press the IDT system down until it engages.
+To disengage the IDT system raise the presser foot. Hold the IDT system with two fingers at the ribbed ankle. Pull the IDT system down, then pull it away from you to release the IDT system slowly upward.
+{{ :equipment:craft:pfaff-idt.png?nolink&400 |}}
+----
+=== Pressure foot pressure ===
+ You should not need to change the presser foot pressure from the standard value "N". When using specialty techniques or when sewing very light or heavy fabrics you can adjust the pressure to improve the result.
+For light fabric turn the dial counterclockwise. The dial may come off if turned too far, but just replace the dial and turn it clockwise until it stays in place.
+For heavy fabric turn the dial clockwise. If it you can't turn it of it comes to a stop you have reached maximum pressure, do not turn any further.
+----
+=== Thread Tension ===
+There is a dial on top of the machine to change thread tenion.
+You may need to adjust the thread tension for different fabrics, batting, stitches and threads, for the best results.
+Typically threads should meet evenly between the two layers of fabric.
+If bobbin thread is visible  on the top side, the needle tension is too tight and needs to be reduced.
+If the top thread is visible on the underside of the fabric, the needle tension is too loose. Increase needle thread tension.
+For decorative stitches and buttonholes, the top thread should be visible on the underside of the fabric.
+It's best to do a few tests of the stitches you want to use on the fabric you are going to sew to check tension.
+{{ :equipment:craft:pfaff_thread_tension.png?nolink&400 |}}
+----
+=== Needles ===
+Use only quality needles to minimise needles breakages. Pfaff recommends using 130/705H needles with these machines. You can be Universal needles, stretch needles, embroidery needles, denim needles and wing needles with this mahcine.
+  * Please change the needles often every 6-8 hours of use.
+  * Always use a straight needle
+  * A damaged needle can cause skipped stitches, breakgae or snapping of thread and damage the stitch plate.
+Do not use asymmetrical twin needles as it may damage your sewing machine.
 ==== Accessories and parts ====