Differences

This shows you the differences between two versions of the page.

--- equipment:cnc:pcbmill [2025/07/06 12:08] – kit
+++ equipment:cnc:pcbmill [2025/07/23 19:06] (current) – Added dust shroud files samp20
@@ Line 6: / Line 6: @@
 <callout title="Crush / Entanglement" type="warning" icon="true"> This equipment is hazardous to the user or those around them, take care during use.</callout>
-====Risks====
+=====Risks=====
   * Low risk of cuts
-  * Noise levels - below 80 db (last test was 68 db withouth extraction) but ear defenders advised, please offer to those around
+  * Noise levels - below 80 db (last test was 68 db without extraction) but ear defenders advised, please offer to those around
   * Do not leave completely unattended - please keep a close eye and stay upstairs in the general use room
   * Pinch injury risk
@@ Line 15: / Line 15: @@
 Full Risk Assessment can be found here: **[TBC]**
 Please also refer to the generic electrical and manual handling risk assessments
-====Induction====
+=====Induction=====
 This machine is in person induction only at the moment.
 Please an induction request on the forum.
-===Specifications===
+=====Specifications=====
   * **Location:** Upstairs, through the general use room, down three steps into the CNC and electronics room, in the corner on your left as you enter.
   * **Model:** Bungard CCD/MTC CNC
@@ Line 39: / Line 40: @@
-===Manual===
+=====Manual=====
 Please note that custom modifications have been made to this system to improve health and safety and ease of use.
 [[https://www.bungard.de/images/downloads/anleitungen/ccd_manual_e.pdf]]
-== Modifications ==
+==== Modifications ====
   * Emergency stop button - for emergencies
@@ Line 50: / Line 51: @@
   * New controller - to control the PCB Mill
   * Height mapping - to give more control and accuracy of the actual height of the work piece for more accurate work
+  * Extraction system - to provide better extraction of dust and vapours
 =====Introduction====
@@ Line 58: / Line 60: @@
 The main advantage of PCB milling is the quick turn around time, hence milling is best used for rapid PCB prototyping.
+Currently the machine is not set up for: Special operating conditions or heavy work pieces may require that the machine is encapsulated. A protection cover is available
+as an option. Also additional work piece clamps will need to be made/purchased.
+==== Extraction ====
+**Extraction system:** Numatic Henry Pet Vacuum Cleaner
+**Filters:** Hospital grade HEPA Allergy filters for Henry [[https://henrybags.co.uk/collections/henry-hoover-filter/products/hospital-grade-henry-allergy-hepa-filter-12-inch-compatible?variant=15782017794114|Hospital grade HEPA Allergy filters for Henry]]
+** Dust shroud design:** {{ :equipment:cnc:pcbmill:dust_shroud.fcstd |}}
 ====Considerations when designing a PCB for milling ====