Differences

This shows you the differences between two versions of the page.

--- equipment:cnc:laser:prep [2023/01/22 12:55] – fraserh
+++ equipment:cnc:laser:prep [2024/11/19 21:42] (current) – external edit 127.0.0.1
@@ Line 22: / Line 22: @@
 === DXF Versions ===
-There are multiple versions of the DXF file [[https://www.loc.gov/preservation/digital/formats/fdd/fdd000446.shtml|spec]]. LaserCut has been observed to have best compatibility with DXF R14, and this should be used if it is an option in your program of choice. If this is not possible check your file carefully after importing, or use LibreCAD in the [[equipment:a0_laser_cutter:software|Laser Cutter Recommended Software]] to change the version.
+There are multiple versions of the DXF file [[https://www.loc.gov/preservation/digital/formats/fdd/fdd000446.shtml|spec]]. LaserCut has been observed to have best compatibility with DXF R14, and this should be used if it is an option in your program of choice. If this is not possible check your file carefully after importing, or use LibreCAD in the [[equipment:cnc:laser:software|Laser Cutter Recommended Software]] to change the version.
 ===== Using LaserCut =====
@@ Line 124: / Line 124: @@
 Click //Del all// to delete the previous file followed by //Download current// to download the current design. If you get an error message or file manager with many unnamed files in it, the laser cutter may be off or the USB connection may have been interrupted requiring unplugging and reconnecting. The the laser cutter is the silver USB cable in the front of the laser PC.
-\\
-**Continue using the controls on the laser cutter itself, please see the [[equipment:a0_laser_cutter:operation|Laser Cutter Operation]] guide.**