Differences

This shows you the differences between two versions of the page.

--- equipment:adt:pfaff-passport-2 [2025/12/20 15:45] – ↷ Page moved from equipment:craft:pfaff-passport-2 to equipment:adt:pfaff-passport-2 kit
+++ equipment:adt:pfaff-passport-2 [2025/12/20 15:46] (current) – ↷ Links adapted because of a move operation kit
@@ Line 2: / Line 2: @@
-{{ :equipment:craft:20251118_135533.jpg?nolink&600 |}}
+{{ equipment:adt:20251118_135533.jpg?nolink&600 |}}
 ===== Safety Instructions =====
@@ Line 28: / Line 28: @@
 ==== Manual ====
-The manual can be found here: {{ :equipment:craft:passport-2.0-instruction-manual.pdf |}}.
+The manual can be found here: {{ equipment:adt:passport-2.0-instruction-manual.pdf |}}.
 ==== Induction ====
@@ Line 40: / Line 40: @@
 The Pfaff sewing machine are to be stored in their boxes in the ADT room. They must be packed away as shown below and placed inside the box ready for the next user.
-{{ :equipment:craft:20251118_135458.jpg?nolink&400 |}}
+{{ equipment:adt:20251118_135458.jpg?nolink&400 |}}
-{{ :equipment:craft:pfaff_lockbox.jpg?nolink&400 |}}
+{{ equipment:adt:pfaff_lockbox.jpg?nolink&400 |}}
 ===== Maintenance =====
@@ Line 54: / Line 54: @@
   - Tighten the needle screw as tight as it will go.
-{{ :equipment:craft:changing_needle.jpg?nolink&400 |}}
+{{ equipment:adt:changing_needle.jpg?nolink&400 |}}
 === Cleaning the machine ===
@@ Line 82: / Line 82: @@
 === Switching on ===
-{{:equipment:craft:pfaffpowerswtich.jpg?nolink&100 |}}
+{{equipment:adt:pfaffpowerswtich.jpg?nolink&100 |}}
   * Power switch if on the right hand side of the sewing machine, along with the power cord connection.
   * Connect the foot control cord to the front of the socket at the bottom left (round hole).
@@ Line 96: / Line 96: @@
 === Free arm ===
-{{:equipment:craft:pfaff-freearm.jpg?nolink&200 |}}
+{{equipment:adt:pfaff-freearm.jpg?nolink&200 |}}
   * For use with sleeves and narrow projects.
   * Slide off the accessory tray
@@ Line 107: / Line 107: @@
 === Thread cutter ===
-{{ :equipment:craft:pfaff-threadcutter.png?nolink&200 |}}
+{{ equipment:adt:pfaff-threadcutter.png?nolink&200 |}}
 (Image taken from manual, page 11).
 To use the thread cutter, pull thread from back to front as in image below:
@@ Line 117: / Line 117: @@
 === Spool pins ===
-{{ :equipment:craft:pfaff_horizontal_spool.png?nolink&200 |}}
+{{ equipment:adt:pfaff_horizontal_spool.png?nolink&200 |}}
 The machine has two spool pins, a main spool pin and an auxiliary spool pin. These are designed for many types of thread. The main spool pin is adjustable and can be used in both horizontal position ( the thread reels off the spool) and a vertical position ( the thread spool rotates. The horizontal position can be used for most sewing and embroidery thread and the vertical position can be used for many speciality thread.
@@ Line 126: / Line 126: @@
 == Vertical Position ==
-{{ :equipment:craft:pfaff_vertical_spool.png?nolink&200 |}}
+{{ equipment:adt:pfaff_vertical_spool.png?nolink&200 |}}
 Turn the spool pin to the vertical position. Slide on the large spool cap and place a felt pad under the spool to prevent the thread reeling off too fast.
@@ Line 137: / Line 137: @@
 We also have a separte spool holder for the large spools available in Hackspace. This primarily works by the thread reeling off the spool, but there is little tension correction prior to the machine so there amy be issues with tension is using this.
-{{ :equipment:craft:largespool_holder.jpg?nolink&200 |}}
+{{ equipment:adt:largespool_holder.jpg?nolink&200 |}}
@@ Line 146: / Line 146: @@
 For single needle theading please follow the images below or refer to the manual for more information. For dual needle trheading please refer to the manual.
-{{ :equipment:craft:pfaff-threading1.png?nolink&400 |}}
+{{ equipment:adt:pfaff-threading1.png?nolink&400 |}}
-{{ :equipment:craft:pfaff-threading2.png?nolink&400 |}}
+{{ equipment:adt:pfaff-threading2.png?nolink&400 |}}
-{{ :equipment:craft:pfaff-threading3.png?nolink&400 |}}
+{{ equipment:adt:pfaff-threading3.png?nolink&400 |}}
@@ Line 166: / Line 166: @@
   - Push the bobbin lever to the right to wind. The letters "SP" will flash on the LED display. Press the foot control to wind the bobbin. When the bobbin is full, release the foot control. Push the bobbin level to the left. Remove the bobbin and cut the thread.
-{{ :equipment:craft:manual-bobbinwinding.png?nolink&400 |}}
+{{ equipment:adt:manual-bobbinwinding.png?nolink&400 |}}
-{{ :equipment:craft:top-bobbin_winding.jpg?nolink&400 |}}
+{{ equipment:adt:top-bobbin_winding.jpg?nolink&400 |}}
-{{ :equipment:craft:front-bobbinwinding.jpg?nolink&400 |}}
+{{ equipment:adt:front-bobbinwinding.jpg?nolink&400 |}}
@@ Line 188: / Line 188: @@
 To disengage the IDT system raise the presser foot. Hold the IDT system with two fingers at the ribbed ankle. Pull the IDT system down, then pull it away from you to release the IDT system slowly upward.
-{{ :equipment:craft:pfaff-idt.png?nolink&400 |}}
+{{ equipment:adt:pfaff-idt.png?nolink&400 |}}
@@ Line 216: / Line 216: @@
 It's best to do a few tests of the stitches you want to use on the fabric you are going to sew to check tension.
-{{ :equipment:craft:pfaff_thread_tension.png?nolink&400 |}}
+{{ equipment:adt:pfaff_thread_tension.png?nolink&400 |}}
@@ Line 235: / Line 235: @@
 Foot contol model C-9002 manufactured by CHIENHUNG TAIWAN., LTD must be used.
-{{ :equipment:craft:pfaff-machine_accessories.png?nolink&400 |}}
+{{ equipment:adt:pfaff-machine_accessories.png?nolink&400 |}}
 (Image taken from manual page 5)
 Selection of presser feet avilable at hackspace:
-{{ :equipment:craft:pfaff-machine_presser_feet.png?nolink&200 |}}
+{{ equipment:adt:pfaff-machine_presser_feet.png?nolink&200 |}}