Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
equipment:adt:pfaff-passport-2 [2026/04/21 18:19] – kitequipment:adt:pfaff-passport-2 [2026/11/12 10:10] (current) – pix
Line 7: Line 7:
   * These sewing machines should only be used by those who are inducted on them, or under the supervision of someone who is.   * These sewing machines should only be used by those who are inducted on them, or under the supervision of someone who is.
   * If the cord or plug is damaged or it is not working properly do not use the machine and let the committee know and place a thread on the forum to let people know it is out of action.   * If the cord or plug is damaged or it is not working properly do not use the machine and let the committee know and place a thread on the forum to let people know it is out of action.
-  * Please keep the air openings and ventilation of the machine unblocked amd reguarly clean out the machine and foot controller from the accummulation of lint, dust and loose cloth.+  * Please keep the air openings and ventilation of the machine unblocked and reguarly clean out the machine and foot controller from the accummulation of lint, dust and loose cloth.
   * Keep fingers away from moving parts, especially around the sewing needle,   * Keep fingers away from moving parts, especially around the sewing needle,
-  * Please only use accesses, needles, bobbins, needle plates etc that are suitable for the machine. Using the wrong parts can cause tensions issues, missed stitches and broken needles.+  * Please only use accessories, needles, bobbins, needle plates etc that are suitable for the machine. Using the wrong parts can cause tensions issues, missed stitches and broken needles.
   * Do not use bent needles.   * Do not use bent needles.
-  * Do not pull or push the fabric while stitching, if can cause the needle to break.+  * Do not pull or push the fabric while stitching, it can cause the needle to break.
   * Wear safety glasses as the needle can break and cause eye damage.   * Wear safety glasses as the needle can break and cause eye damage.
   * Switch the sewing machine off when making adjustments in the needle area, such as threading the needle, changing the needle, threading the bobbin, or changing the presser foot.   * Switch the sewing machine off when making adjustments in the needle area, such as threading the needle, changing the needle, threading the bobbin, or changing the presser foot.
Line 87: Line 87:
   * Press on/off switch to turn on power and light.   * Press on/off switch to turn on power and light.
  
-There are a number of utility stitches from standard stitches, hemming, overlocking, darning, and button hole stitches. There are also some additional quilt, needle art, stain and decorative stitches. Please check the manual as some require the IDT system to be engaged, specific types of thread, needle or tension to work correctly/well.+There are a number of utility stitches including standard stitches, hemming, overlocking, darning, and button hole stitches. There are also some additional quilt, needle art, stain and decorative stitches. Please check the manual as some require the IDT system to be engaged, specific types of thread, needle or tension to work correctly/well.
  
 There is also a handle panel on the yellow Pfaff tab on the right hand side of the machine that you can pull out for quick reference. There is also a handle panel on the yellow Pfaff tab on the right hand side of the machine that you can pull out for quick reference.
Line 121: Line 121:
  
 == Horizontal Position == == Horizontal Position ==
-Place a spool cap and the thead spool pn the spool pin. Make sure that the thread reels over the top and slide the second spool cap.+Place a spool cap and the thead spool on the spool pin. Make sure that the thread reels over the top and slide the second spool cap.
  
-The spool cap should be slightly larger than the thread spool, there are two sizes please use the most appropriate. The flat side of the cap should be pressed firmly against the spool with no gap.+The spool cap should be slightly larger than the thread spool, there are two sizes; please use the most appropriate. The flat side of the cap should be pressed firmly against the spool with no gap.
  
 == Vertical Position == == Vertical Position ==
Line 190: Line 190:
 You can engage and disengage the IDT system depending on your need. You can engage and disengage the IDT system depending on your need.
  
-It only works whether presser feet with the center back cut out (see page 15 in the manual for more information.)  Make sure you don't try and use it with the other feet.+It only works with presser feet with the center back cut out (see page 15 in the manual for more information.)  Make sure you don't try and use it with the other feet.
  
 To engage the IDT system raise the presser foot and press the IDT system down until it engages. To engage the IDT system raise the presser foot and press the IDT system down until it engages.
Line 216: Line 216:
 Typically threads should meet evenly between the two layers of fabric. Typically threads should meet evenly between the two layers of fabric.
  
-If bobbin thread is visible  on the top side, the needle tension is too tight and needs to be reduced.+If bobbin thread is visible on the top side, the needle tension is too tight and needs to be reduced.
  
 If the top thread is visible on the underside of the fabric, the needle tension is too loose. Increase needle thread tension. If the top thread is visible on the underside of the fabric, the needle tension is too loose. Increase needle thread tension.
  • equipment/adt/pfaff-passport-2
  • Last modified: 5 days ago
  • by pix