Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
equipment:adt:embroidery_machine [2026/01/26 21:55] – aarondsequipment:adt:embroidery_machine [2026/08/23 11:21] (current) – Added note on bobbin thread david
Line 36: Line 36:
 The embroidery hoops and spare needles (top right) are stored within the box. The embroidery hoops and spare needles (top right) are stored within the box.
  
-In general leave the door closed but unlocked while you use the machine. This will show the machine as in-use on the tool status page.+{{ :equipment:adt:embroidery_box_open_loops.jpg?400 |}} 
 + 
 +Leave the door closed but unlocked while you use the machine. This will show the machine as in-use on the tool status page.
  
 When finished with the embroidery machine check the following items are in the box as well as the machine: When finished with the embroidery machine check the following items are in the box as well as the machine:
Line 45: Line 47:
  
 Close the door, the orange indicator light should stop flashing to confirm the door is correctly closed. Firmly push the button until the orange indicator goes out to lock the door. Close the door, the orange indicator light should stop flashing to confirm the door is correctly closed. Firmly push the button until the orange indicator goes out to lock the door.
- 
-{{ :equipment:adt:embroidery_box_open_loops.jpg?400 |}} 
  
 === Before turning the machine on === === Before turning the machine on ===
Line 90: Line 90:
  
 Once you've wound the bobbin, you can install it in the machine.  The machine has an animated help screen showing how to do this.  Press the help button on the lower right of the control panel, then press the bobbin installation icon on the top right of the illuminated touch screen.  The {{borther_innovis_750e_quick_reference_guide.pdf?page=5|quick reference guide also shows how to do this}} (step 19 onwards). Make sure that the bobbin will rotate anti-clockwise as the thread is used (i.e. it's coming off the left hand side of the bobbin), and that the thread passes through the tension spring on the bobbin case.  You don't need to pull up the bobbin thread using the upper thread like on a conventional sewing machine.   Once you've wound the bobbin, you can install it in the machine.  The machine has an animated help screen showing how to do this.  Press the help button on the lower right of the control panel, then press the bobbin installation icon on the top right of the illuminated touch screen.  The {{borther_innovis_750e_quick_reference_guide.pdf?page=5|quick reference guide also shows how to do this}} (step 19 onwards). Make sure that the bobbin will rotate anti-clockwise as the thread is used (i.e. it's coming off the left hand side of the bobbin), and that the thread passes through the tension spring on the bobbin case.  You don't need to pull up the bobbin thread using the upper thread like on a conventional sewing machine.  
 +
 +<callout title="Bobbin thread" type="info" icon="true">You'll get better results if you use a special bobbin thread. This is thinner than usual thread (which also means you get more on the bobbin, so less rethreading).  There's some in the embroidery thread box.</callout>
  
  
  • equipment/adt/embroidery_machine.1769464545
  • Last modified: 7 months ago
  • by aaronds