Hackspace dust port standards
This is a document detailing the standard dust port dimensions used in the Hackspace. This can be used as a reference when 3D printing adapters for tools etc.
| Nominal port size | A | B | C | D |
|---|---|---|---|---|
| 100mm | 35mm | minimum 5mm | 102mm | 98mm |
| 65mm | 35mm | minimum 5mm | 67mm | 63mm |
| 50mm | 35mm | minimum 5mm | 52mm | 48mm |
Upstream ports (towards the extractor) shall be male. When designing tool adapters, these should have the female version of the port (and usually 50mm).