====== Hackspace dust port standards ======

This is a document detailing the standard dust port dimensions used in the Hackspace. This can be used as a reference when 3D printing adapters for tools etc.

{{ :resources:dust-port-dimensions-generic.svg |}}

^ Nominal port size ^ A ^ B ^ C ^ D ^
| 100mm   | 35mm | minimum 5mm | 102mm | 98mm |
| 65mm    | 35mm  | minimum 5mm | 67mm  | 63mm |
| 50mm    | 35mm  | minimum 5mm | 52mm  | 48mm |

Upstream ports (towards the extractor) shall be male. When designing tool adapters, these should have the female version of the port (and usually 50mm).