====== Portable Dust Extractor - Yorklean WV100 ======

{{:equipment:woodshop:dustextractor:dust_extractor.jpg?600|}}

<callout title="No-Induction Required" type="danger" icon="true"> This equipment requires no induction prior to use. </callout>

<callout title="PPE Requirements" type="primary" icon="true"> The extractor can be noisy so consider wearing hearing protection during use. If there is a lot of dust in the woodshop, respiratory protection is also recommended. </callout>

==== Specification ====
Product page: [[https://www.yorkleen.co.uk/product/wv100/|Yorklean WV100]]

The WV100 features the well proven dual filtration system (0.5 micron filtration) along with a noise reducing acoustic hood. It’s the ideal extractor for small bench mounted machines such as disc sanders and for power tools. It is compact enough to be stored under a bench. 

|Motor|Single phase 1x1200W vacuum motor|
|Speed|12500rpm|
|Supply|230V 50Hz on a 13A 3-pin BS approved moulded plug|
|Collection Capacity|35ltr (approx)|
|Airflow Rate|70 l/sec (+/-5%)|
|Filters|2 stage, up to 0.5 micron|
|Suction|2500mm WG (+/-5%)|
|Inlet Size (Internal Diameter)|58mm|
|Size|370mm diam x 510mm height|
|Approx. Weight|10kg|
|Noise Level|75dB(A)|

==== Introduction ====
Product Overview: 

{{youtube>v6BhUU8Upk4}}

Full Instruction Manual:

{{ :equipment:woodshop:trend_t33a_extractor_manual.pdf |Trend T33A User Manual.pdf}}

==== Instructions For Use ====

== Check if the bag needs emptying or changing before and after use. ==

== Airborne wood dust is hazardous to health. Wood dust should always be vacuumed rather than swept with a brush to avoid creating airborne dust. ==

== Large chips, eg from planing or the wood lathe should be gathered up using the dustpan and brush and binned before vacuuming. ==

== Do not use without a bag fitted. ==

== Do not use without a filter fitted. ==

== No Wet Use. ==
This machine is for use with wood dust in the wood workshop.

**Do not use this extractor for liquids.** Instead, use the Charles vacuum from the CNC for liquids.

==== Changing the Bag ====

=== Removing the Collection Bag ===

The collection bag must be replaced when the extraction velocity monitor goes to red and stays on red.

  - Unlock the container catches and remove the lid.
  - To remove bag undo the container hose pull bag off the container deflector flange. 
  - Close the bag by flipping the tab over (fig 4 below).
  - Dispose of the filter in a suitable container according to the applicable laws.
  - It is good practice to change the bag regularly to guarantee optimal cooling of the motor.

{{:equipment:woodshop:screenshot_2024-12-18_150420.png?600|}}

=== Inserting a new Collection Bag ===

  - Spare collection bags are kept in the cupboard in the hall. If we are running low, please ask on the consumables forum thread for more to be ordered.
  - The collection bag has a card-reinforced opening with a tab at the top.
  - Handle the bag with care to avoid damage.
  - Insert the collection bag into the container with the opening towards the front of the vacuum cleaner (images below).
  - Pull the bag opening over the container deflector flange ensuring the collection bag opening passes over the ridge on the container deflector.
  - Fold out the rest of the bag downwards into the container.

{{:equipment:woodshop:t33a_feat9_3.jpg?600|}}
{{:equipment:woodshop:screenshot_2024-12-18_150454.png?400|}}

=== Power Take off ===
Auto-Start 1500W Power Tool Take-Off automatically turns the extractor on and off with the connected power tool.

{{:equipment:woodshop:t33a_feat11_3.jpg?400|}}

=== Changing the Hepa Filter ===
{{:equipment:woodshop:t33a_feat8_3.jpg?400|}}