======Solder Reflow Oven - T-962====== Items may still be hot after reflowing is done. Also the underside can get very hot during the cooling phase. {{:equipment:electronics:solder_reflow_oven.jpg?400|}} ===== Specification ===== * Effective soldering area: 180 x 235 mm ===== Instructions ===== === Basic Guidelines === * Place oven on heat-proof mat (e.g. soldering workbench) * Power on reflow oven. * Place PCB into oven on rack. * Enter profile selection with F4 * Choose profile with F1/F2 keys and press S to select. * Press S to start the profile. Manual Mode * Press F3 from the main menu to enter manual mode. * Here you can set a temperature with F1/F2 keys. * A timer can be set with F3/F4. * After preheating the timer will begin counting down. * Once expired the oven will begin to cool down. === About / Useful links=== This is a T-962 solder reflow oven, with a few modifications * the cardboard insulation has been removed and aluminium tape used in its place * a cold-junction temperature sensor has been added * the firmware has been flashed to [[https://github.com/UnifiedEngineering/T-962-improvements| this one]]